Interfacial shear and flexural performances of steel-precast UHPC composite beams: Full-depth slabs with studs vs. demountable slabs with bolts

Two types of steel-precast ultra-high-performance concrete (UHPC) composite beams were investigated in this study, which can be vastly used in accelerated bridge construction (ABC). One of them contains full-depth slabs with stud shear connectors embedded in shear pockets, while the remaining one adopts demountable slabs with high-strength friction-grip bolts (HSFGBs). Four-point bending tests were conducted on six large-scale composite beams to investigate the interfacial shear and flexural performance of such innovative types of steel-precast UHPC composite structures. The failure modes, vertical deflection, horizontal interfacial slip and the stain distribution at mid-span cross-section were investigated. The experimental results indicated that the cracking patterns and failure modes of the composite beams were highly dependent on the slab concrete types and the degrees of shear connection. The composite beams adopting UHPC slabs achieved larger cracking resistance and higher ultimate strength than those containing normal-strength concrete slabs and favorable ductility. Similar trends were also presented by the composite beams with large degrees of shear connection. The composite beams with HSFGBs showed enhanced load capacities and larger vertical deflections and horizontal interface slips at peak load than those adopting stud shear connectors. Additionally, the composite beams that failed in shear connector fractures presented shear resistance-interface slip relationships comparable to their push-out counterparts. Finally, theoretical formulas based on rigid plastic analysis were proposed for predicting the flexural capacity of both types of composite beams.