Processing and microstructure of alumina-based composites

被引：0

作者：

Mujahid, M ^{[1
]}

Qureshi, MI ^{[1
]}

Islam, M ^{[1
]}

Khan, AA ^{[1
]}

机构：

[1] GIK Inst Engn Sci & Technol, Fac Met & Mat Engn, Topi, Pakistan

来源：

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 1999年 / 8卷 / 04期

关键词：

alumina; alumina silica; alumina zirconia; composites; powders;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A study of powder structure and its effect on the sintering tendency of certain alumina-based ceramic systems, that is, Al2O3-SiO2 and Al2O3-ZrO2, was carried out to improve their mechanical strength and fracture toughness. The compacting behavior and the sintering characteristics were optimized through control of various parameters such as composition, compaction pressure, sintering temperature, and time. Best densification was obtained for mixtures prepared using very fine and deagglomerated alumina powders.

引用

页码：496 / 500

页数：5

共 16 条

[1] Processing of Al2O3/SiC composites in aqueous media [J].

Assmann, S ;

Eisele, U ;

Boder, H .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1997, 17 (2-3) :309-317

[2]

BESSON JL, 1987, MAT SCI MONOGRAPHS, V38, P633

[3]

BOSE A, 1992, INT J POWDER METALL, V28, P383

[4] Tape-cast alumina-zirconia laminates: Processing and mechanical properties [J].

Chartier, T ;

Rouxel, T .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1997, 17 (2-3) :299-308

[5]

DICKSON J, 1988, MODERN DEV POWDER ME, V18, P775

[6]

Dube RK, 1990, POWDER METALL, V33, P119, DOI DOI 10.1179/pom.1990.33.2.119

[7]

Friem J., 1998, J AM CERAM SOC, V81, P1773, DOI [10.1111/j.1151-2916.1998.tb02547.x, DOI 10.1111/J.1151-2916.1998.TB02547.X]

[8]

Islam M., 1997, PROJECT REPORT

[9] Alumina-mullite-zirconia composites .2. Microstructural development and toughening [J].

Jang, HM ;

Cho, SM ;

Kim, KT .

JOURNAL OF MATERIALS SCIENCE, 1997, 32 (02) :503-511

[10] Interfacial fracture energy-mechanical behaviour relationship in Al2O3/SiC and Al2O3/TiN nanocomposites [J].

Jiao, S ;

Jenkins, ML ;

Davidge, RW .

ACTA MATERIALIA, 1997, 45 (01) :149-156

← 1 2 →