Dynamic heat transfer characteristics of ice storage in smooth-tube and corrugated-tube heat exchangers

被引：9

作者：

Li, Chengjun ^{[1
]}

Hou, Juan ^{[1
]}

Wang, Yaran ^{[1
]}

Wei, Shen ^{[2
]}

Zhou, Pengkun ^{[1
]}

He, Zhihao ^{[1
]}

Wang, Yeming ^{[1
]}

Zhang, Huan ^{[1
]}

You, Shijun ^{[1
]}

机构：

[1] Tianjin Univ, Sch Environm Sci & Engn, Tianjin 300350, Peoples R China

[2] Univ Coll London UCL, Bartlett Sch Construct & Project Management, 1-19 Torrington Pl, London WC1E, England

来源：

APPLIED THERMAL ENGINEERING | 2023年 / 223卷

关键词：

Ice storage; Smooth tube; Corrugated tube; Prediction model; THERMAL-ENERGY STORAGE; ENHANCEMENT; PERFORMANCE; PCM;

D O I：

10.1016/j.applthermaleng.2023.120037

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The ice storage system is one of the most promising techniques for flexibility enhancement of building cooling load. In this paper, the performances of smooth-tube and corrugated-tube heat exchangers for ice storage are compared by experiments and numerical simulation. The heat transfer process of the ice storage and melting within the heat exchangers is numerically analyzed used Python. The fast one-dimensional numerical model is verified by the experimental results. The temperature variation of the heat transfer fluid (HTF) in the corrugated tube is analyzed and compared with that in the smooth tube. The results show that under the same conditions, the ice storage duration of the corrugated tube is shortened by 25% and the melting duration is shortened by 16% compared with those of the smooth tube. During the ice storage process, the temperature difference between the inlet and outlet of the heat transfer fluid in the corrugated tube is 0.4 degrees C less than that of the smooth tube on average. The temperature change rate is 30% faster than that of the smooth tube. During the melting process, the temperature difference between the inlet and outlet of the heat transfer fluid in the corrugated tube is 0.1 degrees C higher than that of the smooth tube on average, and the temperature change rate of corrugated-tube heat exchanger is 2.5 times and 9 times faster than that of the smooth tube during the ice-storage and melting process. The corrugated-tube heat exchanger has superior performances in ice storage system in the comparison with the smooth-tube heat exchanger.

引用

页数：10

共 30 条

[1] Numerical analysis of a latent heat thermal energy storage system under partial load operating conditions [J].

Arena, Simone ;

Casti, Efisio ;

Gasia, Jaume ;

Cabeza, Luisa F. ;

Cau, Giorgio .

RENEWABLE ENERGY, 2018, 128 :350-361

[2] Experimental study on absorption ice slurry generator with ethanol solution as the refrigerant [J].

Asaoka, Tatsunori ;

Endo, Yusuke .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 162 (162)

[3]

Cao Yeling, 2007, Journal of Nanjing University of Aeronautics & Astronautics, V39, P756

[4] Turbulent heat transfer enhancement in a heat exchanger using asymmetrical outward convex corrugated tubes [J].

Chen, Xin ;

Han, Huaizhi ;

Lee, Kwan-Soo ;

Li, Bingxi ;

Zhang, Yaning .

NUCLEAR ENGINEERING AND DESIGN, 2019, 350 :78-89

[5] Numerical and experimental study of the heat transfer process in a double pipe heat exchanger with inner corrugated tubes [J].

Corcoles, J., I ;

Moya-Rico, J. D. ;

Molina, A. E. ;

Almendros-Ibanez, J. A. .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2020, 158

[6] Melting behaviors of PCM in porous metal foam characterized by fractal geometry [J].

Deng, Zilong ;

Liu, Xiangdong ;

Zhang, Chengbin ;

Huang, Yongping ;

Chen, Yongping .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 113 :1031-1042

[7]

Gnielinski Von Volker, 1975, FORSCHUNG LNGENIEURW, V41

[8] Experimental and numerical investigation of turbulent heat transfer enhancement of an intermediate heat exchanger using corrugated tubes [J].

Hu, Qingxiang ;

Qu, Xinhe ;

Peng, Wei ;

Wang, Jie .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 185

[9] Performance optimization of a finned shell-and-tube ice storage unit [J].

Huang, Yongping ;

Sun, Qing ;

Yao, Feng ;

Zhang, Chengbin .

APPLIED THERMAL ENGINEERING, 2020, 167

[10]

Ji C., 2005, J LIAONING TU, V24, P267

← 1 2 3 →