Non-Linear Analysis of Novel Equivalent Circuits of Single-Diode Solar Cell Models with Voltage-Dependent Resistance

The most commonly used model of solar cells is the single-diode model, with five unknown parameters. First, this paper proposes three variants of the single-diode model, which imply the voltage dependence of the series resistance, parallel resistance, and both resistors. Second, analytical relationships between the current and the voltage expressed were derived using the Lambert W function for each proposed model. Third, the paper presents a hybrid algorithm, Chaotic Snake Optimization (Chaotic SO), combining chaotic sequences with the snake optimization algorithm. The application of the proposed models and algorithm was justified on two well-known solar photovoltaic (PV) cells-RTC France solar cell and Photowatt-PWP201 module. The results showed that the root-mean-square-error (RMSE) values calculated by applying the proposed equivalent circuit with voltage dependence of both resistors are reduced by 20% for the RTC France solar cell and 40% for the Photowatt-PWP201 module compared to the standard single-diode equivalent circuit. Finally, an experimental investigation was conducted into the applicability of the proposed models to a solar laboratory module, and the results obtained proved the relevance and effectiveness of the proposed models.