Electrochemical detection of lead and cadmium ions in water by sensors based on modified track-etched membranes

Electrochemical sensors based on PET track-etched membranes (TeMs) were prepared by photograft polymeri-zation of 2-hydroxyethylmethacrylate (HEMA) and subsequent formation of interpolyelectrolyte complexes with poly(allylamine) (PAlAm). The functionalized TeMs were characterized by scanning electron microscopy (SEM), FTIR spectroscopy, gas permeability and colorimetric assay. Parameters of graft polymerization such as monomer concentration, time of irradiation, solvent and others were estimated and optimized. Cd(II) and Pb(II) ions were detected by using square wave anodic stripping voltammetry (SW-ASV). Additional modification of the modified membranes with 4-mercaptophenylboronic acid (MPBA) led to increasing of stability of the sensors. The linear range for the detection of Cd(II) and Pb(II) ions using the modified electrode was 50 mu g -4.25 mg/L and 10 mu g - 4.25 mg/L. Moreover, the obtained results of SW-ASV demonstrated that the enhancement in the electrochemical signals was achieved with PET TeMs-g-PHEMA-PAlAm\MPBA compared to that of a bare PET TeMs-g-PHEMA. Selectivity test showed that alkali and alkaline earth metal ions, except for magnesium (up to 1 mg/l), do not particularly interfere with the determination of lead and cadmium in the analyte. Sensing of Pb and Cd ions in river water demonstrate us that prepared sensors can be used in real conditions with sufficient accuracy and reproducibility of the results.