Detecting Helical Gearbox Defects from Raw Vibration Signal Using Convolutional Neural Networks

被引:7
作者
Lupea, Iulian [1 ]
Lupea, Mihaiela [2 ]
机构
[1] Tech Univ Cluj Napoca, Fac Ind Engn Robot & Prod Management, Cluj Napoca 400641, Romania
[2] Babes Bolyai Univ, Fac Math & Comp Sci, Cluj Napoca 400084, Romania
关键词
helical gear fault detection; accelerometer sensor; convolutional neural network; vibration signal; FAULT-DETECTION; DIAGNOSIS;
D O I
10.3390/s23218769
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
A study on the gearbox (speed reducer) defect detection models built from the raw vibration signal measured by a triaxial accelerometer and based on convolutional neural networks (CNNs) is presented. Gear faults such as localized pitting, localized wear on helical pinion tooth flanks, and lubricant low level are under observation for three rotating velocities of the actuator and three load levels at the reducer output. A deep learning approach, based on 1D-CNN or 2D-CNN, is employed to extract from the vibration image significant signal features that are used further to identify one of the four states (one normal and three defects) of the system, regardless of the selected load level or the speed. The best-performing 1D-CNN-based detection model, with a testing accuracy of 98.91%, was trained on the signals measured on the Y axis along the reducer input shaft direction. The vibration data acquired from the X and Z axes of the accelerometer proved to be less relevant in discriminating the states of the gearbox, the corresponding 1D-CNN-based models achieving 97.15% and 97% testing accuracy. The 2D-CNN-based model, built using the data from all three accelerometer axes, detects the state of the gearbox with an accuracy of 99.63%.
引用
收藏
页数:22
相关论文
共 29 条
[1]  
Ahmed H., 2020, Condition Monitoring with Vibration SignalsCompressive Sampling and Learning Algorithms for Rotating Machines, DOI [10.1002/9781119544678, DOI 10.1002/9781119544678]
[2]  
[Anonymous], 1995, ISO 10825
[3]   Interval estimation for a binomial proportion - Comment - Rejoinder [J].
Brown, LD ;
Cai, TT ;
DasGupta, A ;
Agresti, A ;
Coull, BA ;
Casella, G ;
Corcoran, C ;
Mehta, C ;
Ghosh, M ;
Santner, TJ ;
Brown, LD ;
Cai, TT ;
DasGupta, A .
STATISTICAL SCIENCE, 2001, 16 (02) :101-133
[4]  
Gabor D., 1946, Journal of the Institution of Electrical EngineersPart III: Radio and Communication Engineering, V93, P429, DOI [10.1049/ji-3-2.1946.0074, DOI 10.1049/JI-3-2.1946.0074]
[5]  
Goldman S., 1999, Vibration spectrum analysis: a practical approach
[6]  
Goodfellow I, 2016, ADAPT COMPUT MACH LE, P1
[7]   Signal-based acoustic emission techniques in civil engineering [J].
Grosse, CU ;
Reinhardt, HW ;
Finck, F .
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2003, 15 (03) :274-279
[8]   Review of Automatic Fault Diagnosis Systems Using Audio and Vibration Signals [J].
Henriquez, Patricia ;
Alonso, Jesus B. ;
Ferrer, Miguel A. ;
Travieso, Carlos M. .
IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS, 2014, 44 (05) :642-652
[9]   Development of a gear vibration indicator and its application in gear wear monitoring [J].
Hu, Chongqing ;
Smith, Wade A. ;
Randall, Robert B. ;
Peng, Zhongxiao .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2016, 76-77 :319-336
[10]   Meshing and dynamic characteristics analysis of spalled gear systems: A theoretical and experimental study [J].
Huangfu, Yifan ;
Chen, Kangkang ;
Ma, Hui ;
Li, Xu ;
Han, Hongzheng ;
Zhao, Zhifang .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2020, 139