High catalytic performance of CuCe/Ti for CO oxidation and the role of TiO2

CuCe/Ti-A and CuCe/Ti-R catalysts were prepared using anatase TiO2 (TiO2-A) and rutile TiO2 (TiO2-R) as supports using the incipient wetness impregnation method for the carbon monoxide (CO) oxidation reaction and were compared with a CuCe-C catalyst prepared using the co-precipitation method. The CuCe/ Ti-A catalyst exhibited the highest activity, with complete CO conversion at 90 degrees C, when the gas hourly space velocity was 24000 ml center dot g(-1)center dot h(-1) and the CO concentration was approximately 1% (vol). A series of characterizations of the catalysts revealed that the CuCe/Ti-A catalyst has a larger specific surface area, more Cu+ species and oxygen vacancies, and the Cu species of CuCe/Ti-A catalyst is more readily reduced. In situ FT-IR results indicate that the bicarbonate species generated on the CuCe/Ti-A catalyst have lower thermal stability than the carbonate species on CuCe/Ti-R, and will decompose more readily to form CO2. Therefore, CuCe/Ti-A has excellent catalytic activity for CO oxidation. (c) 2023 The Chemical Industry and Engineering Society of China, and Chemical Industry Press Co., Ltd. All rights reserved.