Stacking fault strengthening in CoCrFeMnNi high-entropy alloy

被引:10
作者
Duan, Mengye [1 ]
Fu, Tao [1 ,2 ]
Pan, Yang [1 ]
Liu, Xuyang [1 ]
Peng, Xianghe [1 ,2 ]
机构
[1] Chongqing Univ, Dept Engn Mech, Chongqing 400044, Peoples R China
[2] Chongqing Univ, State Key Lab Coal Mine Disaster Dynam & Control, Chongqing 400044, Peoples R China
基金
中国国家自然科学基金;
关键词
MECHANICAL-PROPERTIES; MICROSTRUCTURE; BEHAVIOR; ENERGY;
D O I
10.1063/5.0149734
中图分类号
O59 [应用物理学];
学科分类号
摘要
The effects of stacking faults (SFs) on the mechanical properties of high-entropy alloys (HEAs) may not be ignored because of the lower or even negative SF energy. Here, we investigated the SF strengthening of CoCrFeMnNi and clarified its potential mechanism. It showed experimentally that the CoCrFeMnNi with more SFs had higher strength and hardness than that with fewer SFs, revealing significant SF strengthening. To gain an insight into such effects, we performed simulations for the mechanical responses of CoCrFeMnNi samples with different plane defects at the atomic scale. The results showed that the strengths of the CoCrFeMnNi samples containing SFs or twin boundaries were higher than that of single crystal ones. Overall, our results suggested that the effects of SFs on the mechanical properties of FCC HEAs could not be ignored, and the atomistic insights into the strengthening mechanism of HEAs we provided would be beneficial to improve the mechanical properties of FCC HEAs.
引用
收藏
页数:7
相关论文
共 50 条
[31]   Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: Microstructure, anisotropic mechanical response, and multiple strengthening mechanism [J].
Kim, Young-Kyun ;
Cho, Jungho ;
Lee, Kee-Ahn .
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 805 :680-691
[32]   Synergetic strengthening of additively manufactured (CoCrFeMnNi)99C1 high-entropy alloy by heterogeneous anisotropic microstructure [J].
Park, Jeong Min ;
Choe, Jungho ;
Park, Hyung Keun ;
Son, Sujung ;
Jung, Jaimyun ;
Kim, Taek-Soo ;
Yu, Ji-Hun ;
Kim, Jung Gi ;
Kim, Hyoung Seop .
ADDITIVE MANUFACTURING, 2020, 35
[33]   Effect of ultrasonic surface rolling extrusion on microstructural evolution and wear resistance of laser-clad CoCrFeMnNi high-entropy alloy with low stacking fault energy [J].
Liu, Hao ;
Li, Dali ;
Wang, Ruitong ;
Chen, Peijian ;
Zhu, Rongtao ;
Wang, Yanfei ;
Liu, Xinhua .
JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1010
[34]   Cryogenic Treatment of CoCrFeMnNi(NbC) High-Entropy Alloys [J].
Abbasi, Erfan ;
Dehghani, Kamran .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (11) :6779-6788
[35]   High-entropy CoCrFeMnNi alloy subjected to high-strain-rate compressive deformation [J].
Tsai, Shao-Pu ;
Tsai, Yu-Ting ;
Chen, Yu-Wen ;
Chen, Pin-Jung ;
Chiu, Po-Han ;
Chen, Chih-Yuan ;
Lee, Woei-Shyan ;
Yeh, Jien-Wei ;
Yang, Jer-Ren .
MATERIALS CHARACTERIZATION, 2019, 147 :193-198
[36]   Resistance of CoCrFeMnNi high-entropy alloy to gaseous hydrogen embrittlement [J].
Zhao, Yakai ;
Lee, Dong-Hyun ;
Seok, Moo-Young ;
Lee, Jung-A ;
Phaniraj, M. P. ;
Suh, Jin-Yoo ;
Ha, Heon-Young ;
Kim, Ju-Young ;
Ramamurty, Upadrasta ;
Jang, Jae-Il .
SCRIPTA MATERIALIA, 2017, 135 :54-58
[37]   High-Temperature Oxidation Behavior and Grinding Performance of CoCrFeMnNi High-Entropy Alloy [J].
Zhang, Jiangyu ;
Liu, Yueqiu ;
Chen, Yanling ;
Liu, Shizhao .
ADVANCED ENGINEERING MATERIALS, 2025, 27 (04)
[38]   Influence of hydrogen on incipient plasticity in CoCrFeMnNi high-entropy alloy [J].
Yang, Guanghui ;
Zhao, Yakai ;
Lee, Dong-Hyun ;
Park, Jeong-Min ;
Seok, Moo-Young ;
Suh, Jin-Yoo ;
Ramamurty, Upadrasta ;
Jang, Jae-il .
SCRIPTA MATERIALIA, 2019, 161 :23-27
[39]   Enhancing bending fatigue resistance of the CoCrFeMnNi high-entropy alloy thin foils by Al addition [J].
Zou, Ji-Peng ;
Luo, Xue-Mei ;
Zhang, Bin ;
Luo, Yan-Wen ;
Chen, Hong-Lei ;
Liang, Fei ;
Zhang, Guang-Ping .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 831
[40]   Anisotropic Response of CoCrFeMnNi High-Entropy Alloy Fabricated by Selective Laser Melting [J].
Wang, Bowen ;
Sun, Miao ;
Li, Bobo ;
Zhang, Lijuan ;
Lu, Bingheng .
MATERIALS, 2020, 13 (24) :1-17