Synthesis and Characterization of Titania-MXene-Based Phase Change Material for Sustainable Thermal Energy Storage

PLUCISE A82 (PW82) is considered one of the best phase change materials as it is economical, commercially viable, and eco-friendly. Unless there is a great need to optimize the number of parameters to investigate encapsulated PCMs with good performance, for the effective and practical applications of organic phase change materials, it is required to enhance their thermal conductivity. In this study, efforts were made to increase the thermal properties of phase change materials by seeding different nanoparticles. The direct synthesis method, in which the mixing of nanoparticles in paraffin wax (PW82) takes place, is used for the production of NEPCM. Differential scanning calorimeter and heat conduction experiments were used to evaluate the effect of variable concentration of nano-encapsulation on thermal storage and heat conduction characteristics of nano-enhanced PCM. The thermal storage feasibility was also determined. In this study, titania (TiO2), Ti3C2/MXene was mixed in PW82 in 0.1, 0.2, and 0.3 wt.%. The investigation was also carried out for hybrid nano-enhanced PCM in a hybrid combination of (TiO2), and Ti3C2 (MXene) in PW82, used in wt.% concentration of 0.1, 0.2, and 0.3. Doping of titania and MXene improves the specific heat capacity of PCM. For doping of 0.3 wt.% of TiO2-Ti3C2 in PCM, the specific heat is improved to 41.3%. A maximum increment in thermal conductivity of 15.6% is found for doping of TiO2-Ti3C2 0.3 wt.%. The dissociation temperature of this prepared nano-enhanced PCM increases by similar to 6% for 0.3 wt.% weight fraction. Therefore, this study demonstrates that the doping of TiO2 and Ti3C2 with PW82 to form a new class of NEPCMs has significant scope to enhance the thermal storage capacity of organic paraffin.