Influence mechanisms of torrefaction on syngas production from bio-waste molten salt thermal treatment

The production of high-value syngas from bio-wastes through thermal conversion is a promising way to achieve carbon neutrality. In order to reduce the cost of the process, molten salt thermal treatment has been used for biowastes syngas production. Moreover, the removal of oxygen and water induced by torrefaction can effectively enhance the energy density of biomass, and the effect of these changes on the quality of syngas was widely investigated. This study proposed to torrefy bio-wastes and then produce syngas in molten NaNO3-NaNO2-KNO3 at 300 degrees C. Results showed that the evaluation indices of syngas were improved, while the cold gas efficiency reached 44.02 % for beech wood torrefied at 280 degrees C, and the syngas quality is equivalent to the products obtained by gasification of bio-wastes. The gas yield of the torrefied bio-wastes was increased by 8.08-45.23 % compared to the raw bio-wastes. Na+ and K+ in the molten salt catalyzed the cracking of propyl chains and ring opening of aromatic rings in lignin, resulting in a prominent enhancement in CO yield. Meanwhile, torrefaction could change the solid structure, leading to a delay in gas production, and torrefaction could also increase graphitization degree of char (C-C/C = C up to 50.72 % for SB-280), thus preventing the reaction proceeding. This study provided a new approach to enhance the content and quality of syngas from bio-wastes at low temperatures.