Effect of laser welding and laser wire filling on forming and properties of dissimilar steel welded joints

被引：4
作者：
Sun, Lina [1 ]
Lu, You [1 ]
Jiang, Junxiang [1 ]
机构：
[1] Jilin Agr Sci & Technol Univ, Sch Mech & Civil Engn, Jilin 132101, Peoples R China
来源：
MATERIALS RESEARCH EXPRESS | 2023年 / 10卷 / 12期
关键词：
laser wire filler welding; butt gap; mechanical properties; microstructure;
D O I：
10.1088/2053-1591/ad0dd1
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to study the effects of different welding methods and different butt gaps on the microstructure and properties of welded joints of steel with unequal thickness, the medium carbon steel of 2 mm 50CrV and low carbon steel of 6 mm SPHE were used as test materials, and the welding was carried out by single laser and laser wire filling welding. The results show that the laser wire filling welding can reduce the welding cracks, and with the increase of the butt gap, the melt height gradually decreases, and the weld morphology transitions from Y shape to H shape. With the increase of the butt gap, the weld defects form. The hardness of weld center decreases with the increase of butt gap. The average hardness of weld formed by laser welding alone is the highest, and the highest hardness of welded joint is located in the heat affected zone of 50CrV medium carbon steel. The tensile strength of welded joints first increases and then decreases with the increase of butt gaps. When the butt gap is 0.6 mm, the surface morphology is good and the tensile strength is the highest. The fracture position of the welding test is on the side of the 2 mm 50CrV medium carbon steel.
引用
收藏
页数：11
相关论文
共 50 条
[21]   Variances in Microstructure Evolution and Mechanical Properties of Dissimilar Steel Welded Joints Produced with Tungsten Inert Gas (TIG) Welding and Laser Beam Welding (LBW) [J].
Xu, Y-l. ;
Qian, P. ;
Liu, J. ;
Lin, J-y. ;
Li, J-y ;
Shi, M-x. .
LASERS IN ENGINEERING, 2023, 56 (4-6) :319-333
[22]   Effects of Welding Speed on Microstructure and Mechanical Properties of CO2 Laser Welded Dissimilar Butt Joints between Low Carbon Steel and Austenitic Stainless Steel [J].
Prabakaran, M. P. ;
Kannan, G. R. ;
Pandiyarajan, R. .
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 :1-12
[23]   Effect of heat input on microstructure and properties of dissimilar laser welded joints between TWIP and TRIP steels [J].
Sun, Qian ;
Di, Hong-Shuang ;
Wang, Xiao-Nan ;
Chen, Xia-Ming ;
Nie, Xiao-Kang ;
Chen, Dong-Liang ;
Li, Jian-Ping .
METALLURGICAL RESEARCH & TECHNOLOGY, 2019, 116 (06)
[24]   Effect of Martensite Content on Microstructure and Properties of Laser Welded Dual -Phase Steel Joints [J].
Huan Pengcheng ;
Chen Wengang ;
Wang Xiaonan ;
Zheng Zhi ;
Zhu Tiancai ;
Zhang Min ;
Chen Changjun .
LASER & OPTOELECTRONICS PROGRESS, 2018, 55 (11)
[25]   Numerical Simulation and Mechanical Properties of 6063/6082 Dissimilar Joints by Laser Welding [J].
Cui, Shuwan ;
Tian, Fuyuan ;
Zhang, Suojun ;
Cai, Hongfeng ;
Yu, Yunhe .
COATINGS, 2023, 13 (12)
[26]   Effect of welding wire and groove angle on mechanical properties of high strength steel welded joints [J].
Evci, C. ;
Isik, H. ;
Macar, M. .
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2017, 48 (09) :912-921
[27]   Microstructure and deformation behaviour of laser welded dissimilar dual phase steel joints [J].
Dong, D. ;
Liu, Y. ;
Wang, L. ;
Yang, Y. ;
Jiang, D. ;
Yang, R. ;
Zhang, W. .
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2016, 21 (02) :75-82
[28]   Effect of laser oscillating welding on microstructure and mechanical properties of 40Cr steel/45 steel fillet welded joints [J].
Cheng, Wei ;
Zhang, Xiaolei ;
Lu, Jinzhong ;
Dai, Fengze ;
Luo, Kaiyu .
OPTIK, 2021, 231 (231)
[29]   Influence of Cu Coating on the Microstructure and Mechanical Properties of Laser Welded Joints in Dissimilar Metals [J].
Chen, Congsheng ;
Peng, Xingling ;
Li, Yulong ;
Hu, Xiaowu ;
Wang, Wenqin .
LASERS IN ENGINEERING, 2019, 43 (1-3) :131-144
[30]   Microstructure and Mechanical Properties of 6061 Aluminum Alloy by Laser Welding with Filling Wire [J].
Xu Fei ;
Guo Yafei ;
Gong Shuili ;
Chen Li ;
Guo Luyun .
MACHINERY, MATERIALS SCIENCE AND ENGINEERING APPLICATIONS, 2012, 510 :585-+
12345