Prototyping of rotating packed bed structural internals

被引：2

作者：

Zawadzki, Dawid ^{[1
]}

Majdzik, Malgorzata ^{[1
]}

Piatkowski, Marcin ^{[1
]}

Jaskulski, Maciej ^{[1
]}

Blatkiewicz, Micha l ^{[1
]}

机构：

[1] Lodz Univ Technol, Fac Proc & Environm Engn, Wolczanska 213, PL-90924 Lodz, Poland

来源：

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION | 2024年 / 196卷

关键词：

Rotating packed bed; Process intensification; Absorption; Additive manufacturing; Mass transfer; MASS-TRANSFER; CARBON-DIOXIDE; KINETICS; AREA;

D O I：

10.1016/j.cep.2024.109678

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

A rapid prototyping method was developed for quick and inexpensive design of various geometrical solutions for rotating packed bed internals. Sixteen geometries were designed with the use of 3D modeling software and subsequently 3D-printed, if possible. The printed packings were tested for dry pressure drop to reject the ones generating too high air flow resistance. Eventually, the packings were tested for wet pressure drop and effective mass transfer area generated in specified conditions. An evaluation method was designed to compare the results from the different packings and determine the geometry most suited for the absorption process.

引用

页数：13

共 30 条

[1]

Astarita G., 1967, MASS TRANSFER CHEM R

[2]

Charpentier J.-C., 1981, Advances in Chemical Engineering, P1, DOI DOI 10.1016/S0065-2377(08)60025-3

[3] Enhanced Regeneration of Triethylene Glycol Solution by Rotating Packed Bed for Offshore Natural Gas Dehydration Process: Experimental and Modeling Study [J].