Surface Coating Effect on Corrosion Resistance of Titanium Alloy Bone Implants by Anodizing Method

被引：7

作者：

Ningrum, Eva Oktavia ^{[1
]}

Khoiroh, Ianatul ^{[2
]}

Nastiti, Hanifah Inas ^{[1
]}

Affan, Ryan Anindya ^{[1
]}

Karisma, Achmad Dwitama ^{[1
]}

Agustiani, Elly ^{[1
]}

Surono, Agus ^{[1
]}

Suroto, Heri ^{[3
]}

Suprapto, S. ^{[1
]}

Taji, Lulu Sekar ^{[1
]}

Widiyanto, Sinung ^{[4
]}

机构：

[1] Inst Teknol Sepuluh Nopember, Fac Vocat Studies, Dept Ind Chem Engn, Kampus ITS Sukolilo, Surabaya 60111, Indonesia

[2] Univ Nottingham Malaysia, Fac Sci & Engn, Dept Chem & Environm Engn, Semenyih 43500, Selangor, Malaysia

[3] Airlangga Univ, Dr Soetomo Gen Acad Hosp, Fac Med, Orthoped & Traumatol Dept, Jl Mayjen Prof Dr Moestopo 47, Surabaya 60132, Indonesia

[4] Hang Tuah Univ, Fac Engn & Marine Sci, Magister Ocean Engn, Jl Arief Rahman Hakim 150, Surabaya 60111, Indonesia

来源：

INTERNATIONAL JOURNAL OF TECHNOLOGY | 2023年 / 14卷 / 04期

关键词：

Anodizing; Corrosion resistance; Titanium oxide; Ti-6Al-4V alloy; TI-6AL-4V ALLOY; ANODIZATION; BEHAVIOR; LAYERS;

D O I：

10.14716/ijtech.v14i4.6146

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In the presented work, the formation of anodic oxide film on Ti-6Al-4V ELI (Extra Low Interstitial) alloy in 0.02 M trisodium phosphate (Na3PO4) electrolyte solution using various voltages were investigated. The color produced by the anodizing, the intensity of TiO2 content, the thickness of the oxide layer, and the corrosion rate were examined. It was obtained that the color appearance of Ti-6Al-4V ELI could be changed easily by altering the applied voltages. The higher the voltage applied in the anodizing process, the thicker the titanium oxide layer formed. The corrosion resistance analysis in a Simulated Body Fluid revealed that the non-anodized specimen showed a higher corrosion rate compared to the anodized specimen. The increase of oxide layer thickness leads to a significant decrease in corrosion rate and consequently increases the corrosion resistance. In addition, the anodized sample achieved the highest corrosion resistance at 15 V.

引用

页码：749 / 760

页数：12

共 38 条

[1] Al-Mobarak NA, 2014, INT J ELECTROCHEM SC, V9, P32
[2] Alphanoda A.F., 2017, Jurnal Teknologi Rekayasa, V1, DOI [10.31544/jtera.v1.i1.2016.1-6, DOI 10.31544/JTERA.V1.I1.2016.1-6]
[3] Structural, Morphological, and Electrochemical Corrosion Properties of TiO2 Formed on Ti6Al4V Alloys by Anodization
Atmani, Djamila
Saoula, Nadia
Abdi, Abderrezak
Azzaz, Mohamed
Wang, Youling
Mohamedi, Mohamed
[J]. CRYSTAL RESEARCH AND TECHNOLOGY, 2018, 53 (12)
[4] Bakr M., 2021, EGYPTIAN J HISTOLOGY, V45, P849
[5] Bhola R., 2011, ELECT PRECISION TREA, V47, P75
[6] Effect of Cinnamaldehyde, an Anti-Inflammatory Agent, on the Surface Characteristics of a Plaster of Paris - CaCO3 Hydrogel for Bone Substitution in Biomedicine
Dewi, Anne Handrini
Yulianto, Dedy Kusuma
Ana, Ika Dewi
Rochmadi
Siswomihardjo, Widowati
[J]. INTERNATIONAL JOURNAL OF TECHNOLOGY, 2020, 11 (05) : 963 - 973
[7] Fadl-allah S. A., 2013, J BIOMATERIALS NANOB, V04, P74, DOI DOI 10.4236/JBNB.2013.41010
[8] Gabor R., 2020, SCI REPORTS
[9] Dental Implant Monitoring Using Resonance Frequency Analysis (RFA) and Cone Beam Computed Tomography (CBCT) Measurement
Genisa, Maya
Shuib, Solehuddin
Rajion, Zainul Ahmad
Mohamad, Dasmawati
Arief, Erry Mochamad
[J]. INTERNATIONAL JOURNAL OF TECHNOLOGY, 2020, 11 (05) : 1015 - 1024
[10] Corrosion behavior of electrochemically assembled nanoporous titania for biomedical applications
Indira, K.
Mudali, U. Kamachi
Rajendran, N.
[J]. CERAMICS INTERNATIONAL, 2013, 39 (02) : 959 - 967

← 1 2 3 4 →