ITRF2020 Plate Motion Model

A tectonic Plate Motion Model (PMM) is essential for geodetic applications, while contributing to the understanding of geodynamic processes affecting the Earth's surface. We introduce a PMM derived from the horizontal velocities of 518 sites extracted from the ITRF2020 solution. These sites were chosen away from plate boundaries, Glacial Isostatic Adjustment regions, and other deforming zones. Unlike the ITRF2014-PMM, which showed no significant Origin Rate Bias (ORB), velocities used to determine the ITRF2020-PMM exhibit a statistically significant ORB (0.74 +/- 0.09 mm/yr along the Z-component). Users are advised to add the estimated ORB to the horizontal velocities predicted by the ITRF2020-PMM rotation poles for full consistency with the ITRF2020. However, the predicted vertical velocities resulting from the addition of the ORB should be discarded. The overall precision with which the ITRF2020 velocity field is represented by the rigid ITRF2020-PMM is at the level of 0.25 mm/yr WRMS. The Earth's surface is divided in large and small tectonic plates, which evolve and move slowly over time, resulting in lateral displacements of the ground surface typically of the order of a few cm/yr. Because of the relative motion between tectonic plates, plate boundaries can be either divergent (when two plates move away from each other), convergent (when two plates collide) or transform (when two plates slide past each other). Plate motion models are used to quantify the relative motions of the plates with respect to each other, and are determined using geological data or observations collected by space geodesy instruments distributed over different plates at the Earth's surface. In the latter case, space geodesy observations from the four space geodetic techniques covering more than 40 years of data are analyzed to estimate the long-term displacements (or velocities) of each instrument in a well defined and self-consistent global reference frame. The derived velocity field is then used to estimate a comprehensive plate motion model (PMM). This article presents a PMM for 13 tectonic plates based on a subset of the velocity field from the recently released International Terrestrial Reference Frame 2020 (ITRF2020); see . We derive a plate motion model for 13 tectonic plates from the ITRF2020 horizontal velocity fieldBuilt under the rigid-plate motion hypothesis, the model represents the ITRF2020 velocity field with a precision of 0.25 mm/yr WRMSThe residual velocities would show a global northward motion if a translation rate was not included in the inversion model