Two- and Three-Dimensional Modeling and Simulations of Grain Growth Behavior in Dual-Phase Steel Using Monte Carlo and Machine Learning

Dual-phase (DP) steel has been widely used in automotive steel plates with a balance of excellent strength and ductility. Grain refinement in DP steel is important to improve the properties further; however, the factors affecting grain growth need to be well understood. The remaining problem is that acquiring data through experiments is still time-consuming and difficult to evaluate quantitatively. With the development of materials informatics in recent years, material development time and costs are expected to be significantly reduced through experimentation, simulation, and machine learning. In this study, grain growth behavior in DP steel was studied using two-dimensional (2D) and three-dimensional (3D) Monte Carlo modeling and simulation to estimate the effect of some key parameters. Grain growth can be suppressed when the grain boundary energy is greater than the phase boundary energy. When the volume fractions of the matrix and the second phase were equal, the suppression of grain growth became obvious. The long-distance diffuse frequency can promote grain growth significantly. The simulation results allow us to better understand the factors affecting grain growth behavior in DP steel. Machine learning was performed to conduct a sensitivity analysis of the affecting parameters and estimate the magnitude of each parameter's effects on grain growth in the model. Combining MC simulation and machine learning will provide one promising research strategy to gain deeper insights into grain growth behaviors in metallic materials and accelerate the research process.