Fatigue analysis of as-built and heat-treated severely notched AlSi10Mg alloy specimens made by laser powder bed fusion technology

被引：4
|
作者：
Razavi, Nima [1 ]
Bagherifard, Sara [1 ,2 ]
Hafnor, Sondre [1 ]
Spiller, Saveria [1 ]
Guagliano, Mario [2 ]
Berto, Filippo [1 ,3 ]
机构：
[1] Norwegian Univ Sci & Technol NTNU, Dept Mech & Ind Engn, Trondheim, Norway
[2] Politecn Milan, Dept Mech Engn, Milan, Italy
[3] Sapienza Univ Rome, Dept Chem Engn Mat Environm, Rome, Italy
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2024年 / 179卷
关键词：
Additive manufacturing; selective laser melting (SLM); Fatigue; Notch; Heat treatment; CRACK PROPAGATION BEHAVIOR; HIGH-CYCLE FATIGUE; MECHANICAL-PROPERTIES; ORIENTATION; MICROSTRUCTURE; PARTS; ALUMINUM; STRENGTH;
D O I：
10.1016/j.ijfatigue.2023.108041
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This study examines L-PBF-fabricated aluminium alloy specimens with smooth and notched geometries, assessing their axial fatigue performance in both as-built and heat-treated conditions. The influence of the performed heat treatment on microstructure, production defects and fatigue properties was investigated on unnotched specimens and specimens with deep U-notch geometry. The experimental results revealed significant impact of heat treatment on the microstructure and internal defects, which resulted in an enhancement of fatigue properties of the specimens. Lastly, the fatigue results revealed a negligible impact of the employed heat treatment on the notch sensitivity of the studied materials.
引用
收藏
页数：10
相关论文
共 50 条
  • [21] Fatigue analysis and heat treatment comparison of additively manufactured specimens from AlSi10Mg alloy
    Matusu, Martin
    Dzuberova, Ludmila
    Papuga, Jan
    Rosenthal, Jakub
    Simota, Jan
    Beranek, Libor
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 185
  • [22] Influence of the as-built surface and a T6 heat treatment on the fatigue behavior of additively manufactured AlSi10Mg
    Lehner, Patrick
    Blinn, Bastian
    Zhu, Tong
    Al-Zuhairi, Ali
    Smaga, Marek
    Teutsch, Roman
    Beck, Tilmann
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 187
  • [23] Indentation Behavior Assessment of As-Built, Solution, and Artificial Aged Heat-Treated Selective Laser Melting Specimens of AlSi10Mg
    Kamil, Abubakr Shahnawaz
    Muzamil, Muhammad
    Akhtar, Maaz
    Alsaleh, Naser
    Khan, Rashid
    Samiuddin, Muhammad
    Siddiqui, Ali Khursheed
    Yang, Junzhou
    Djuansjah, Joy
    CRYSTALS, 2024, 14 (07)
  • [24] Enhancing as-built microstructural integrity and tensile properties in laser powder bed fusion of AlSi10Mg alloy using a comprehensive parameter optimization procedure
    Salandari-Rabori, Adib
    Wang, Pusong
    Dong, Qingshan
    Fallah, Vahid
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 805
  • [25] INFLUENCE OF ROUGH AS-BUILT SURFACES ON SMOOTH AND NOTCHED FATIGUE BEHAVIOR OF L-PBF AlSi10Mg
    Nicoletto, Gianni
    ADDITIVE MANUFACTURING, 2020, 34
  • [26] Room- and High-Temperature Fatigue Strength of the T5 and Rapid T6 Heat-Treated AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion
    Di Egidio, Gianluca
    Ceschini, Lorella
    Morri, Alessandro
    Zanni, Mattia
    METALS, 2023, 13 (02)
  • [27] Boosting Productivity of Laser Powder Bed Fusion for AlSi10Mg
    Defanti, Silvio
    Cappelletti, Camilla
    Gatto, Andrea
    Tognoli, Emanuele
    Fabbri, Fabrizio
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2022, 6 (05):
  • [28] Dislocation-obstacle interaction evolution in rate dependent plasticity of AlSi10Mg as-built microstructure by laser powder bed fusion
    Salandari-Rabori, Adib
    Diak, Bradley J.
    Fallah, Vahid
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 857
  • [29] Influence of Microstructure on Fracture Mechanisms of the Heat-Treated AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion
    Di Egidio, Gianluca
    Martini, Carla
    Borjesson, Johan
    Ghassemali, Ehsan
    Ceschini, Lorella
    Morri, Alessandro
    MATERIALS, 2023, 16 (05)
  • [30] Effect of heat treatment on the impact toughness and thermal properties of the AlSi10Mg alloy manufactured by laser powder bed fusion
    Kreethi, R.
    Sohn, Yongho
    Lee, Kee-Ahn
    PROGRESS IN ADDITIVE MANUFACTURING, 2024, 9 (02) : 543 - 551
12345