A Heuristically Accelerated Reinforcement Learning-Based Neurosurgical Path Planner

被引:17
作者
Ji, Guanglin [1 ,2 ]
Gao, Qian [1 ,2 ]
Zhang, Tianwei [1 ,2 ]
Cao, Lin [3 ]
Sun, Zhenglong [1 ,2 ]
机构
[1] Chinese Univ Hong Kong, Sch Sci & Engn, Shenzhen, Peoples R China
[2] Robot Soc, Inst Artificial Intelligence, Shenzhen, Peoples R China
[3] Univ Sheffield, Dept Automat Control & Syst Engn, Sheffield, England
来源
CYBORG AND BIONIC SYSTEMS | 2023年 / 4卷
关键词
CONCENTRIC TUBE; INSERTION;
D O I
10.34133/cbsystems.0026
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
The steerable needle becomes appealing in the neurosurgery intervention procedure because of its flexibility to bypass critical regions inside the brain; with proper path planning, it can also minimize the potential damage by setting constraints and optimizing the insertion path. Recently, reinforcement learning (RL)-based path planning algorithm has shown promising results in neurosurgery, but because of the trial and error mechanism, it can be computationally expensive and insecure with low training efficiency. In this paper, we propose a heuristically accelerated deep Q network (DQN) algorithm to safely preoperatively plan a needle insertion path in a neurosurgical environment. Furthermore, a fuzzy inference system is integrated into the framework as a balance of the heuristic policy and the RL algorithm. Simulations are conducted to test the proposed method in comparison to the traditional greedy heuristic searching algorithm and DQN algorithms. Tests showed promising results of our algorithm in saving over 50 training episodes, calculating path lengths of 0.35 after normalization, which is 0.61 and 0.39 for DQN and traditional greedy heuristic searching algorithm, respectively. Moreover, the maximum curvature during planning is reduced to 0.046 from 0.139 mm-1 using the proposed algorithm compared to DQN.
引用
收藏
页数:11
相关论文
共 31 条
[1]   A Novel Path Planner for Steerable Bevel-Tip Needles to Reach Multiple Targets With Obstacles [J].
Aghdam, Afsoon Nejati ;
Liu, Peter Xiaoping .
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2020, 69 (10) :7636-7645
[2]   Deep Reinforcement Learning A brief survey [J].
Arulkumaran, Kai ;
Deisenroth, Marc Peter ;
Brundage, Miles ;
Bharath, Anil Anthony .
IEEE SIGNAL PROCESSING MAGAZINE, 2017, 34 (06) :26-38
[3]   Accelerating autonomous learning by using heuristic selection of actions [J].
Bianchi, Reinaldo A. C. ;
Ribeiro, Carlos H. C. ;
Costa, Anna H. R. .
JOURNAL OF HEURISTICS, 2008, 14 (02) :135-168
[4]   Heuristically-Accelerated Multiagent Reinforcement Learning [J].
Bianchi, Reinaldo A. C. ;
Martins, Murilo F. ;
Ribeiro, Carlos H. C. ;
Costa, Anna H. R. .
IEEE TRANSACTIONS ON CYBERNETICS, 2014, 44 (02) :252-265
[5]  
Caborni C, 2012, BIOROB 2012 P 2012 4
[6]   Conditional DQN-Based Motion Planning With Fuzzy Logic for Autonomous Driving [J].
Chen, Long ;
Hu, Xuemin ;
Tang, Bo ;
Cheng, Yu .
IEEE TRANSACTIONS ON INTELLIGENT TRANSPORTATION SYSTEMS, 2022, 23 (04) :2966-2977
[7]   The Cancer Imaging Archive (TCIA): Maintaining and Operating a Public Information Repository [J].
Clark, Kenneth ;
Vendt, Bruce ;
Smith, Kirk ;
Freymann, John ;
Kirby, Justin ;
Koppel, Paul ;
Moore, Stephen ;
Phillips, Stanley ;
Maffitt, David ;
Pringle, Michael ;
Tarbox, Lawrence ;
Prior, Fred .
JOURNAL OF DIGITAL IMAGING, 2013, 26 (06) :1045-1057
[8]   An Evolutionary-Optimized Surgical Path Planner for a Programmable Bevel-Tip Needle [J].
Favaro, Alberto ;
Segato, Alice ;
Muretti, Federico ;
De Momi, Elena .
IEEE TRANSACTIONS ON ROBOTICS, 2021, 37 (04) :1039-1050
[9]   3D Slicer as an image computing platform for the Quantitative Imaging Network [J].
Fedorov, Andriy ;
Beichel, Reinhard ;
Kalpathy-Cramer, Jayashree ;
Finet, Julien ;
Fillion-Robin, Jean-Christophe ;
Pujol, Sonia ;
Bauer, Christian ;
Jennings, Dominique ;
Fennessy, Fiona ;
Sonka, Milan ;
Buatti, John ;
Aylward, Stephen ;
Miller, James V. ;
Pieper, Steve ;
Kikinis, Ron .
MAGNETIC RESONANCE IMAGING, 2012, 30 (09) :1323-1341
[10]  
Hoelscher J, 2021, IEEE ROBOT AUTOM LET, V6, P3987, DOI [10.1109/LRA.2021.3066962, 10.1109/lra.2021.3066962]