Enhancing low thermal expansion behavior and strength via induced Zr-rich intermetallic phase in Fe-36Ni Invar alloy

Nowadays, Invar alloy combining low thermal expansion behavior with improved mechanical properties is highly required. This study investigated the influence of Zr-rich intermetallic compounds (IMCs) on microstructure, thermal expansion behavior, and mechanical properties in Fe-36Ni Invar alloy. Zr-rich IMCs, namely Ni7Zr2 and Ni2Zr were introduced into Fe-36Ni Invar alloy by the addition of 0.22 wt% Zr. The microstructure of Zr-containing alloy was remarkably refined and accompanied by high dislocation density, which was associated with the resistance of recrystallization by the introduction of Zr-rich IMCs. The Invar alloy displayed a sufficiently low coefficient of thermal expansion (CTE) in the temperature interval of 20 degrees C similar to 100 degrees C and 20 degrees C similar to 200 degrees C after Zr treatment, with a CTE constant of 0.66 x 10(-6) /degrees C and 2.07 x 10(-6) /degrees C, respectively. The existence of residual stress and refinement of grain were responsible for an obvious decrease in CTE. Meanwhile, the yield strength increased from 256 MPa to 401 MPa after Zr treatment. The strengthening contribution mainly arose from dislocation strengthening and grain refinement strengthening. (C) 2023 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).