Pore network simulation of loop heat pipe evaporator with different pore size distribution

被引:6
作者
Nishikawara, Masahito [1 ]
机构
[1] Toyohashi Univ Technol, Dept Mech Engn, Hibarigaoka, Tenpaku Cho, Toyohashi, Aichi 4418580, Japan
关键词
Additive manufacturing; Capillary evaporator; Pore network model; Porous media; Three-phase contact line; Two-phase flow; MASS-TRANSFER; CAPILLARY PERFORMANCE; PHASE-CHANGE; POROUS WICK; MENISCUS; LIQUID;
D O I
10.1016/j.ijheatmasstransfer.2023.124739
中图分类号
O414.1 [热力学];
学科分类号
摘要
To investigate the relationship between the loop heat pipe evaporator heat-transfer coefficient and wick pore size distribution, this work simulated the two-phase thermal hydraulics in the evaporator by pore network model in three dimensions. The simulation considered a liquid-vapor (L-V) two-phase state in the wick, which is induced by nucleate boiling and local pore-scale fluid dynamics. Some wick samples, while having the same macroscopic porous characteristics such as permeability, were created with different pore size distributions. Heat transfer and fluid flow of the evaporator were solved with ammonia and R134a as working fluids, along with stainless-steel and polytetrafluoroethylene (PTFE) porous materials. Each evaporator showed a different evaporator heattransfer coefficient and maximum applied heat flux. Some characteristics with respect to the L-V phase distribution in the wick were selected to investigate their correlation with heat-transfer coefficients. As a result, the correlation coefficients with the three-phase contact line (TPCL) length ranged from 0.70 to 0.91. Only the TPCL showed a correlation with the heat-transfer coefficients in all conditions, as opposed to the vapor pocket maximum depth and liquid saturation. It was discovered that the TPCL length is proportional to the heat-transfer coefficients. In all cases, the TPCL length and heat-transfer coefficients reached a maximum at moderate pore size dispersion. In addition, The heat-transfer coefficients of the PTFE wick were more sensitive to the TPCL length than that of the stainless-steel one. The discovery helps enhance the thermal performance of the evaporator porous structural design by additive manufacturing.
引用
收藏
页数:8
相关论文
共 35 条
[11]   Pore Network Simulations of Heat and Mass Transfer inside an Unsaturated Capillary Porous Wick in the Dry-out Regime [J].
Le, Kieu Hiep ;
Kharaghani, Abdolreza ;
Kirsch, Christoph ;
Tsotsas, Evangelos .
TRANSPORT IN POROUS MEDIA, 2016, 114 (03) :623-648
[12]  
Lee W.H., 2004, 13 IHPC, P265
[13]  
Lemmon E.W., 2018, NIST Reference Fluid Thermodynamic and Transport Properties - REFPROP V10.
[14]   Development of biporous wicks for flat-plate loop heat pipe [J].
Li, Huan ;
Liu, ZhiChun ;
Chen, BinBin ;
Liu, Wei ;
Li, Chen ;
Yang, Jinguo .
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2012, 37 :91-97
[15]   Three-dimensional lattice Boltzmann investigation on pore scale liquid-vapor distribution patterns and heat transfer performance of a loop heat pipe heterogeneous porous wick evaporator [J].
Li, Jian ;
Zheng, Wenhan ;
Hong, Fangjun .
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2021, 128
[16]   Thermal performance of loop heat pipe with porous copper fiber sintered sheet as wick structure [J].
Ling, Weisong ;
Zhou, Wei ;
Liu, Ruiliang ;
Qiu, Qingfu ;
Liu, Jie .
APPLIED THERMAL ENGINEERING, 2016, 108 :251-260
[17]   Numerical simulation of heat and mass transfer in bidispersed capillary structures: Application to the evaporator of a loop heat pipe [J].
Mottet, L. ;
Prat, M. .
APPLIED THERMAL ENGINEERING, 2016, 102 :770-784
[18]   Three dimensional liquid and vapour distribution in the wick of capillary evaporators [J].
Mottet, L. ;
Coquard, T. ;
Prat, M. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 83 :636-651
[19]   Formation of unsaturated regions in the porous wick of a capillary evaporator [J].
Nishikawara, M. ;
Nagano, H. ;
Mottet, L. ;
Prat, M. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 89 :588-595
[20]   Wicking characteristics of porous media using short copper micro/nanofibers [J].
Nishikawara, Masahito ;
Sako, Toshihiro ;
Yokoyama, Hiroshi ;
Yanada, Hideki .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 195