Solid-state surface alloying of ZK60 Mg alloy with tin using friction stir processing

被引：1
|
作者：
Lingampalli, Bhavya [1 ]
Dondapati, Sreekanth [1 ,2 ]
机构：
[1] Vellore Inst Technol, Sch Mech Engn, Chennai, India
[2] Vellore Inst Technol, Sch Mech Engn, Chennai Campus,Vandalur Kelambakkam Rd, Chennai 600127, Tamilnadu, India
来源：
MATERIALS TECHNOLOGY | 2024年 / 39卷 / 01期
关键词：
Friction stir processing; ZK60 Mg alloy; surface alloy; corrosion; tin; MECHANICAL-PROPERTIES; PROCESS PARAMETERS; MG-2ZN-2GD ALLOY; DEFORMATION; ALUMINUM; BEHAVIOR;
D O I：
10.1080/10667857.2024.2318886
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present study aims to alloy the surface of ZK60 Mg alloy with Sn using friction stir processing (FSP). Experiments were conducted with the combination of higher and lower values of tool rotational speed and feed rate to evaluate the best combination of parameters for the alloy formation. The surface alloy has been successfully formed with improved hardness and corrosion properties in the combination of higher rotational speed of 2800 rpm and lower processing speed of 0.6 mm/min, which was attributed to the proper diffusion of Sn particles at the higher temperature produced in that combination of parameters.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Microstructural Evolution of a Cast ZK60 Mg Alloy/SiCp Surface Composites Induced by Friction Stir Process
    Kumar, M. Vignesh
    Veerappan, Ar
    Padmanaban, G.
    Balasubramanian, V
    PHYSICS OF METALS AND METALLOGRAPHY, 2021, 122 (04) : 403 - 415
  • [2] Effects of friction stir processing on hydrogen storage of ZK60 alloy
    Silva, E. P.
    Leiva, D. R.
    Pinto, H. C.
    Floriano, R.
    Neves, A. M.
    Botta, W. J.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2018, 43 (24) : 11085 - 11091
  • [3] Effect of Multipass Friction Stir Processing on Surface Corrosion Resistance and Wear Resistance of ZK60 Alloy
    Liu, Dejia
    Shen, Mingxue
    Tang, Yanchuan
    Hu, Yong
    Zhao, Longzhi
    METALS AND MATERIALS INTERNATIONAL, 2019, 25 (05) : 1182 - 1190
  • [4] Effect of friction stir processing parameters on the microstructure and properties of ZK60 magnesium alloy
    Hu, Yijie
    Sun, Youping
    He, Jiangmei
    Fang, Dejun
    Zhu, Jiaxin
    Meng, Xiangchao
    MATERIALS RESEARCH EXPRESS, 2022, 9 (01)
  • [5] Effect of Tool Pin Profile on Microstructure and Hardness of Magnesium Alloy Zk60/SiCp Surface Composites Fabricated by Friction Stir Processing
    Kumar, M. Vignesh
    Padamanaban, G.
    Balasubramanian, V
    JOURNAL OF TESTING AND EVALUATION, 2019, 47 (06) : 4309 - 4319
  • [6] Influence of texture on superplastic behavior of friction stir processed ZK60 magnesium alloy
    Yang, Q.
    Feng, A. H.
    Xiao, B. L.
    Ma, Z. Y.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 556 : 671 - 677
  • [7] Microstructural Evolution of a Cast ZK60 Mg Alloy/SiCp Surface Composites Induced by Friction Stir Process
    AR. M. Vignesh Kumar
    G. Veerappan
    V. Padmanaban
    Physics of Metals and Metallography, 2021, 122 : 403 - 415
  • [8] Macrostructure, microstructure and mechanical properties of bobbin tool friction stir welded ZK60 Mg alloy joints
    Li, Gaohui
    Zhou, Li
    Zhang, Junfeng
    Luo, Sanfeng
    Guo, Ning
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (04): : 9348 - 9361
  • [9] Superplastic Behavior of Friction Stir Processed ZK60 Magnesium Alloy
    Xie, G. M.
    Luo, Z. A.
    Ma, Z. Y.
    Xue, P.
    Wang, G. D.
    MATERIALS TRANSACTIONS, 2011, 52 (12) : 2278 - 2281
  • [10] Influence of Tool Rotational Speed on the Formation of Friction Stir Processing Zone in Cast Zk60/SiCp Magnesium Alloy Surface Composites
    Vigneshkumar, M.
    Padmanaban, G.
    Balasubramanian, V
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2018, 7 (01) : 579 - 590
12345