Mechanical and thermal characterization of additively manufactured novel multilayer polymer composite through experiments and finite element simulation

被引：9

作者：

Arunkumar, T. ^{[1
]}

Dutta, Hrishikesh ^{[1
]}

Puttaiah, Harisha ^{[2
]}

机构：

[1] Chennai Inst Technol, Ctr Addit Mfg, Chennai, Tamil Nadu, India

[2] CMR Inst Technol, Dept Mech Engn, Bengaluru, India

来源：

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES | 2024年 / 31卷 / 30期

关键词：

Sustainable development; additive manufacturing; multilayer composite; mechanical properties; surface morphology; glass transition temperature; FAILURE ANALYSIS; WOOD; SPECIMENS;

D O I：

10.1080/15376494.2024.2335654

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study presents the investigation of mechanical and thermal properties of additively manufactured novel multilayer composites (MLC). Wood and carbon-reinforced poly-lactic acid were used as the base materials for the 3D printing of the MLC. The tensile, compressive, and flexural strengths of the developed MLC were 51.47, 70.90, and 73.3MPa, respectively. The finite element simulation values of tensile and compressive strength of the MLC were 51.01 and 70.02MPa depicting negligible variations of 0.90% and 1.24%. The glass transition temperatures for the WRP, CFRP, and MLC specimens were 54.85 degrees C, 57.29 degrees C, and 56.78 degrees C, respectively.

引用

页码：13238 / 13250

页数：13

共 42 条

[1] Additive Manufacturing of Polymer-Based Composites Using Fused Filament Fabrication (FFF): a Review [J].

Ahmadifar, M. ;

Benfriha, K. ;

Shirinbayan, M. ;

Tcharkhtchi, A. .

APPLIED COMPOSITE MATERIALS, 2021, 28 (05) :1335-1380

[2]

Ansari Anis A., 2022, IOP Conference Series: Materials Science and Engineering, V1248, DOI 10.1088/1757-899X/1248/1/012070

[3]

Arif M., 2017, Int. J. Eng. Manuf. Sci, V7, P393

[4]

Artigues M.M.P., 2020, Materials, V13, P15

[5] Wood-plastic composites as promising green-composites for automotive industries! [J].

Ashori, Alireza .

BIORESOURCE TECHNOLOGY, 2008, 99 (11) :4661-4667

[6] Fabrication and characterization of weld attributes in hot gas welding of alkali treated hybrid flax fiber and pine cone fibers reinforced poly-lactic acid (PLA) based biodegradable polymer composites: studies on mechanical and morphological [J].

Banerjee, Abhranil ;

Jha, Kanishka ;

Petru, Michal ;

Kumar, Rajeev ;

Sharma, Shubham ;

Saini, Mandeep Singh ;

Mohammed, Kahtan A. ;

Kumar, Abhinav ;

Abbas, Mohamed ;

Tag-Eldin, Elsayed M. .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 :272-297

[7] Thermo-mechanical analysis of additive manufacturing for material properties estimation of layered polymer composite [J].

Bashir, Usman ;

Hassan, Abrar ;

Ahmed, Furqan ;

Zain-ul-abdein, Muhammad ;

Mubeen, Hajrah ;

Dildar, Abdullah ;

Hayat, Qamar ;

Ijaz, Hassan ;

Asad, Muhammad ;

Djavanroodi, Faramarz .

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2024, 31 (26) :8180-8190

[8] Physico-chemical Characterization of PLA-based Composites Holding Carbon Nanofillers [J].

Batakliev, Todor ;

Georgiev, Vladimir ;

Kalupgian, Cristiane ;

Munoz, Pablo A. R. ;

Ribeiro, Helio ;

Fechine, Guilhermino J. M. ;

Andrade, Ricardo J. E. ;

Ivanov, Evgeni ;

Kotsilkova, Rumiana .

APPLIED COMPOSITE MATERIALS, 2021, 28 (04) :1175-1192

[9] Development of rapid tooling using fused deposition modeling: a review [J].

Boparai, Kamaljit Singh ;

Singh, Rupinder ;

Singh, Harwinder .

RAPID PROTOTYPING JOURNAL, 2016, 22 (02) :281-299

[10] Tensile and Compressive Behavior in the Experimental Tests for PLA Specimens Produced via Fused Deposition Modelling Technique [J].

Brischetto, Salvatore ;

Torre, Roberto .

JOURNAL OF COMPOSITES SCIENCE, 2020, 4 (03)

← 1 2 3 4 5 →