Heat Transfer Characteristics of Oil-Based Drill Cuttings in Thermal Desorption Chambers

被引:2
作者
Wang, Maoren [1 ]
Liu, Yucheng [2 ]
机构
[1] China Univ Petr Beijing Karamay, Sch Engn, Karamay 102249, Peoples R China
[2] Southwest Petr Univ, Sch Chem Engn, Shanghai 610500, Peoples R China
关键词
oil-based drill cuttings; thermal desorption; heat transfer; temperature field; multiphase flow; FLOW;
D O I
10.3390/pr11051374
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Thermal desorption technologies have been extensively applied for the disposal of oil-based drill cuttings. Fluent-software-based phase changes in multiphase flow models within thermal desorption chamber temperature field simulations were examined to study the effects of oil-based drill cuttings fluid content and feed rates, nitrogen content, thermal desorption chamber length and diameter, and extraction tube position on the thermal desorption chamber and temperature field. Our results demonstrate that these factors had a considerable influence on the temperature field of the chamber, with the liquid content of the oil-based drill cuttings having the greatest influence. The heat transfer process was enhanced by appropriately increasing the diameter and length of the chamber and reasonably setting the extraction tube. When the chamber length was insufficient, there was a risk that the outlet temperature would be extremely low and the oil content of the residue would exceed the standard. The higher the feeding and nitrogen entering rates of the oil cuttings, the higher the liquid content of the oil cuttings and the lower the temperature in the chamber. Based on the heat transfer characteristics of the oil-based drill cuttings in the thermal desorption chamber, this study provides a theoretical basis for the design and application of oil-bearing cutting thermal desorption devices.
引用
收藏
页数:14
相关论文
共 26 条
[1]  
Ali R, 2021, JORDAN J MECH IND EN, V15, P357
[2]  
Chen H.T., 2020, OILFIELD EQUIP, V49, P79
[3]   Decrement in heat transfer effectiveness due to solid heat conduction for a counter-current spiral heat exchanger [J].
Duc-Khuyen Nguyen ;
San, Jung-Yang .
APPLIED THERMAL ENGINEERING, 2016, 103 :821-831
[4]  
Nwosu BE, 2021, Journal of Engineering Research and Reports, P1, DOI 10.9734/jerr/2021/v21i317447
[5]   Numerical study of fluid dynamics and heat transfer property of dual fluidized bed gasifier [J].
Fan, Feihu ;
Zheng, Min ;
Yang, Shiliang ;
Wang, Hua .
ENERGY, 2021, 234
[6]   Modeling and simulation of coupled pyrolysis and gasification of oily sludge in a rotary kiln [J].
Gao, Ningbo ;
Jia, Xiangyu ;
Gao, Guanqun ;
Ma, Zhengzhao ;
Quan, Cui ;
Naqvi, Salman Raza .
FUEL, 2020, 279
[7]   The study on pyrolysis of oil-based drilling cuttings by microwave and electric heating [J].
Hou, Yingfei ;
Qi, Shengdong ;
You, Haipeng ;
Huang, Zhaoqi ;
Niu, Qingshan .
JOURNAL OF ENVIRONMENTAL MANAGEMENT, 2018, 228 :312-318
[8]   Low-temperature thermal desorption and secure landfill for oil-based drill cuttings management: Pollution control, human health risk, and probabilistic cost assessment [J].
Hu, Guangji ;
Liu, Huan ;
Chen, Chang ;
Hou, Haobo ;
Li, Jianbing ;
Hewage, Kasun ;
Sadiq, Rehan .
JOURNAL OF HAZARDOUS MATERIALS, 2021, 410
[9]   Experimental analysis of heat transfer enhancement in shell and helical tube heat exchangers [J].
Jamshidi, N. ;
Farhadi, M. ;
Ganji, D. D. ;
Sedighi, K. .
APPLIED THERMAL ENGINEERING, 2013, 51 (1-2) :644-652
[10]  
Ji H.G., 2021, J HAZARD MATER, V401, P123861