Structure and Properties of Dissimilar Joint of Ti and Al Alloys Obtained by Friction Stir Welding

被引：0
|
作者：
Amirov, A. I. [1 ]
Chumaevskii, A. V. [1 ]
Utyaganova, V. R. [1 ]
Gusarova, A. V. [1 ]
Gurianov, D. A. [1 ]
Rubtsov, V. E. [1 ]
Beloborodov, V. A. [1 ]
Sokolov, P. S. [1 ]
Kolubaev, E. A. [1 ]
机构：
[1] Russian Acad Sci, Siberian Branch, Inst Strength Phys & Mat Sci, Tomsk, Russia
来源：
RUSSIAN PHYSICS JOURNAL | 2023年 / 66卷 / 09期
基金：
俄罗斯科学基金会;
关键词：
aluminum alloy; titanium alloy; friction stir welding; fractography; mechanical strength; weld structure; EVOLUTION;
D O I：
10.1007/s11182-023-03031-x
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
The paper deals with friction stir welding of Grade 5 Ti alloy and AA2024 Al alloy sheets based on liquid cooling of welded joints. The metallographic analysis shows the mutual Al and Ti dissolution in the stir zone of the welded joint. The fractographic analysis of the surface shows a non-uniform fracture in the weld zone due to unwelded areas and a brittle fracture due to the presence of intermetallic components, which, in turn embrittle welded joints. By varying the parameters of friction stir welding, the adhesion between the materials is improved to obtain a joint with the highest possible strength.
引用
收藏
页码：970 / 977
页数：8
相关论文
共 50 条
  • [1] Structure and Properties of Dissimilar Joint of Ti and Al Alloys Obtained by Friction Stir Welding
    A. I. Amirov
    A. V. Chumaevskii
    V. R. Utyaganova
    A. V. Gusarova
    D. A. Gurianov
    V. E. Rubtsov
    V. A. Beloborodov
    P. S. Sokolov
    E. A. Kolubaev
    Russian Physics Journal, 2023, 66 : 970 - 977
  • [2] The joint properties of dissimilar formed Al alloys by friction stir welding according to the fixed location of materials
    Lee, WB
    Yeon, YM
    Jung, SB
    SCRIPTA MATERIALIA, 2003, 49 (05) : 423 - 428
  • [3] Interface characteristic of friction stir welding lap joints of Ti/Al dissimilar alloys
    Chen Yu-hua
    Ni Quan
    Ke Li-ming
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (02) : 299 - 304
  • [4] Influences of ultrasonic on friction stir welding of Al/Ti dissimilar alloys under different welding conditions
    Ma, Zhongwei
    Sun, Xiao
    Ji, Shude
    Wang, Yue
    Yue, Yumei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 112 (9-10): : 2573 - 2582
  • [5] Influences of ultrasonic on friction stir welding of Al/Ti dissimilar alloys under different welding conditions
    Zhongwei Ma
    Xiao Sun
    Shude Ji
    Yue Wang
    Yumei Yue
    The International Journal of Advanced Manufacturing Technology, 2021, 112 : 2573 - 2582
  • [6] Dissimilar friction stir welding of pure Ti and pure Al
    Choi, Jeong-Won
    Liu, Huihong
    Fujii, Hidetoshi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 730 : 168 - 176
  • [7] The joint properties of dissimilar formed A356 and 6061 Al alloys by friction stir-welding method
    Lee, WB
    Yeon, YM
    Jung, SB
    FRICTION STIR WELDING AND PROCESSING II, 2003, : 123 - 131
  • [8] Microstructure and properties of dissimilar materials Mg/Al laped joint by friction stir welding
    Chen, Y. (lndlflying@126.com), 2012, Harbin Research Institute of Welding (33):
  • [9] Numerical simulation of heat and mass transfer in novel stepped structure friction stir welding of Ti/Al dissimilar alloys
    Zhang, Xiankun
    Shi, Lei
    Luo, Hengyu
    Wu, Chuansong
    Mironov, Sergey
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2025, 242
  • [10] Refill Friction Stir Spot Welding Dissimilar Al/Mg Alloys
    Chai, Peng
    Hu, Wei
    Ji, Shude
    Ai, XinXin
    Lv, Zan
    Song, Qi
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (10) : 6174 - 6181
12345