Investigation of thermal processes in the gap during explosion welding

被引：6
作者：
Khaustov, S. V. [1 ]
Pai, V. V. [2 ]
Lysak, V. I. [1 ]
Kuz'min, S. V. [1 ]
机构：
[1] Volgograd State Tech Univ, Lenin Av 28, Volgograd 400005, Russia
[2] Siberian Branch Russian Acad Sci, Lavrentyev Inst Hydrodynam, Lavrentyev Prospect 15, Novosibirsk 630090, Russia
来源：
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2023年 / 209卷
关键词：
Explosion welding; Shock-compressed gas; Heat flux; Thermocouple method; JET FORMATION; COLLISIONS; SURFACE; JOINTS;
D O I：
10.1016/j.ijheatmasstransfer.2023.124166
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
This paper describes a thermocouple method for measuring the heat flux from the shock-compressed gas in the welding gap to the surfaces of the impacted plates during explosion welding. A set of experiments was conducted to determine the heat flux during explosion welding of copper plates at a distance of 0.4-0.6 m from the beginning of welding. The heat flux from the shock-compressed gas was found to be independent of the contact point velocity in the range of 180 0-250 0 m/s. As a result, the temperature of surface preheating before collision was found to be quantitatively dependent on the size and material of the welded plates. Thus, the effect of preheating the plates with shock-compressed gas in the gap can be commensurate with the energy released in the weld at the subsequent collision of the plates.(c) 2023 Elsevier Ltd. All rights reserved.
引用
收藏
页数：8
相关论文
共 35 条
  • [1] Anisimov S.I., 1970, High Power Radiation Impact on Metals
  • [2] Towards better understanding of explosive welding by combination of numerical simulation and experimental study
    Bataev, I. A.
    Tanaka, S.
    Zhou, Q.
    Lazurenko, D., V
    Jorge Junior, A. M.
    Bataev, A. A.
    Hokamoto, K.
    Mori, A.
    Chen, P.
    [J]. MATERIALS & DESIGN, 2019, 169
  • [3] EVOLUTION OF TITANIUM STRUCTURE IN THE ZONE OF THE JOINT FORMED BY EXPLOSIVE WELDING
    Berdychenko, A. A.
    Pervukhin, L. B.
    Pervukhina, O. L.
    [J]. METAL SCIENCE AND HEAT TREATMENT, 2009, 51 (9-10) : 476 - 481
  • [4] Possible ignition of particles ejected into the gap in explosive welding of titanium
    Berdychenko, AA
    Zlobin, BS
    Pervukhin, LB
    Shtertser, AA
    [J]. COMBUSTION EXPLOSION AND SHOCK WAVES, 2003, 39 (02) : 232 - 239
  • [5] FLOW CONFIGURATIONS IN COLLIDING PLATES - EXPLOSIVE BONDING
    COWAN, GR
    HOLTZMAN, AM
    [J]. JOURNAL OF APPLIED PHYSICS, 1963, 34 (04) : 928 - &
  • [6] Crossland B., 1982, EXPLOSIVE WELDING ME
  • [7] DERIBAS A, 1972, Physics of hardening and welding by explosion M
  • [8] SURFACE EFFECTS WITH OBLIQUE COLLISIONS BETWEEN METALLIC PLATES
    DERIBAS, AA
    ZAKHARENKO, ID
    [J]. COMBUSTION EXPLOSION AND SHOCK WAVES, 1974, 10 (03) : 358 - 367
  • [9] DERIBAS AA, 1975, COMBUST EXPLO SHOCK+, V11, P133
  • [10] GODUNOV SK, 1975, COMBUST EXPLO SHOCK+, V11, P1
1234