Experimental investigation of additively manufactured high-temperature heat exchangers

被引：3

作者：

Fuchs, Marco ^{[1
]}

Bodemer, Julian ^{[1
]}

Kabelac, Stephan ^{[1
]}

机构：

[1] Leibniz Univ Hannover, Inst Thermodynam, Univ 1, D-30823 Hannover, Germany

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2024年 / 218卷

关键词：

Additive manufacturing; Heat exchanger; High temperature; Heat transfer coefficients; Friction; -factors; Experimental; DESIGN; STATE; FINS;

D O I：

10.1016/j.ijheatmasstransfer.2023.124774

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This article examines various additively manufactured heat exchangers for high-temperature applications. The heat exchangers differ in terms of their internal fin structure as well as optimizations in terms of manufacturing quality. Starting from a reference fin type, optimizations with focus on low pressure drop and high heat transfer are performed. The heat exchangers are investigated experimentally, focusing on the laminar flow regime between 60

引用

页数：19

共 50 条

[1] Experimental Investigation and Comparison of the Thermal Performance of Additively and Conventionally Manufactured Heat Exchangers
Vafadar, Ana
Guzzomi, Ferdinando
Hayward, Kevin
METALS, 2021, 11 (04)
[2] Experimental Characterization of Additively Manufactured Metallic Heat Exchangers
Mortazavi, Mehdi
Niknam, Seyed A.
Heidari, Mahbod
Clemente, Riccardo C.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2021, 11 (12): : 2089 - 2101
[3] Experimental Characterization of an Additively Manufactured Inconel 718 Heat Exchanger for High-Temperature Applications
Battaglia, Fabio
Arie, Martinus
Zhang, Xiang
Ohadi, Michael
Shooshtari, Amir
ENERGIES, 2023, 16 (10)
[4] INVESTIGATION OF THE DIMENSIONAL ACCURACY OF ADDITIVELY MANUFACTURED HIGH-TEMPERATURE MATERIAL (PEEK)
Atatreh, Saleh
Alyammahi, Mozah Saeed
Susantyoko, Rahmat Agung
Mohammed, Abdallah
PROCEEDINGS OF ASME 2022 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2022, VOL 4, 2022,
[5] Experimental characterization of an additively manufactured heat exchanger for high temperature and pressure applications
Rasouli, Erfan
Tano, Ines-Noelly
Aboud, Aref
Seo, Junwon
Lamprinakos, Nicholas
Rollett, Anthony
Narayanan, Vinod
APPLIED THERMAL ENGINEERING, 2025, 264
[6] HIGH-TEMPERATURE OXIDATION KINETICS OF ADDITIVELY MANUFACTURED NITIHF
Dabbaghi, Hediyeh
Nematollahi, Mohammadreza
Baghbaderani, Keyvan Safaei
Bayatimalayeri, Parisa
Elahinia, Mohammad
PROCEEDINGS OF THE ASME 2020 15TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE (MSEC2020), VOL 1A, 2020,
[7] Investigation of High-Temperature Printed Circuit Heat Exchangers for Very High Temperature Reactors
Mylavarapu, Sai
Sun, Xiaodong
Figley, Justin
Needler, Noah
Christensen, Richard
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2009, 131 (06): : 1 - 7
[8] Additively manufactured heat exchangers: a review on opportunities and challenges
Niknam, Seyed A.
Mortazavi, Mehdi
Li, Dongsheng
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 112 (3-4): : 601 - 618
[9] HIGH-TEMPERATURE HEAT-EXCHANGERS
SCHROTER, HJ
ERDOL & KOHLE ERDGAS PETROCHEMIE, 1986, 39 (02): : 57 - 57
[10] Additively manufactured heat exchangers: a review on opportunities and challenges
Seyed A. Niknam
Mehdi Mortazavi
Dongsheng Li
The International Journal of Advanced Manufacturing Technology, 2021, 112 : 601 - 618

← 1 2 3 4 5 →