Novel Development of an NbC-Containing Powder-Metallurgical Martensitic Steel with Outstanding Tribocorrosion Resistance

被引：2

作者：

Hahn, Isabel ^{[1
]}

Siebert, Sabine ^{[1
]}

Fluch, Rainer ^{[2
]}

Theisen, Werner ^{[1
]}

Weber, Sebastian ^{[1
]}

机构：

[1] Ruhr Univ Bochum, Chair Mat Technol, Univ Str 150, D-44801 Bochum, Germany

[2] voestalpine BOHLER Edelstahl GmbH & Co KG, Mariazeller Str 25, A-8605 Kapfenberg, Austria

来源：

STEEL RESEARCH INTERNATIONAL | 2023年 / 94卷 / 04期

关键词：

corrosion; martensitic stainless steels; niobium carbides; powder metallurgy; tribocorrosion resistances; wears; WEAR;

D O I：

10.1002/srin.202200474

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The development of NbC-containing martensitic stainless steels has made it possible to unite the properties of high corrosion resistance and wear resistance. If NbC is used as a hard phase instead of chromium carbide, the abrasive wear resistance of the steels is increased due to the greater hardness of NbC. The solubility of chromium in NbC is low. For this reason, chromium is fully available to form a passive surface layer to increase the corrosion resistance. In the steel melt, niobium leads to the formation of primary NbC, which grows very rapidly. Atomization of PM steels leads to the formation of coarse primary hard phases that clog the nozzle. Therefore, until now, steels with NbC as a hard phase are produced using the PM route with so-called diffusion alloying; however, this production route is very complex and expensive. Herein, a novel Nb-rich MC-containing wear- and corrosion-resistant steel that is produced using the usual PM route is presented. This steel consists of a martensitic matrix with evenly dispersed Nb-rich MC having a volume of 2.5%. Due to the high hardness (>750 HV30) in combination with high resistance to pitting corrosion, the steel exhibits outstanding tribocorrosion resistance in 0.9% NaCl solution.

引用

页数：7

共 28 条

[11] Development of wear and corrosion resistant cold-work tool steels produced by diffusion alloying [J].

Huth, S. ;

Krasokha, N. ;

Theisen, W. .

WEAR, 2009, 267 (1-4) :449-457

[12]

Huth S., 2009, P 8 INT TOOL C AACH, V1, P425

[13]

Huth S., 2009, THESIS RUHR U BOCHUM

[14] Diffusion alloying - a new manufacturing method for PM tool steels [J].

Huth, Stephan ;

Theisen, Werner .

POWDER METALLURGY, 2009, 52 (02) :90-93

[15] Tribocorrosion study of martensitic and austenitic stainless steels in 0.01 M NaCl solution [J].

Huttunen-Saarivirta, E. ;

Kilpi, L. ;

Hakala, T. J. ;

Carpen, L. ;

Ronkainen, H. .

TRIBOLOGY INTERNATIONAL, 2016, 95 :358-371

[16]

Karag?z S., 1988, METALL TRANS, V19A, P1988

[17]

Landolt D, 2011, TRIBOCORROSION OF PASSIVE METALS AND COATINGS, P1, DOI 10.1533/9780857093738

[18]

Ponthiaux, 2021, MECH ELECTROCHEMICAL

[19] Development of a powder metallurgical corrosion-resistant bearing steel containing NbC and its transfer to industrial applications [J].

Seifert, M. ;

Siebert, S. ;

Theisen, W. .

MATERIALS SCIENCE AND TECHNOLOGY, 2016, 32 (04) :313-319

[20]

Seifert M, 2015, THESIS RUHR U BOCHUM

← 1 2 3 →