Comparative microstructure characteristics and properties of arc-sprayed Fe-based and HVOF-sprayed Ni-based coatings on ASME SA 210 C steel tube

被引：7
作者：
Widjajanto, Teguh [1 ]
Darmadi, Djarot B. [1 ]
Irawan, Yudy Surya [1 ]
Gapsari, Femiana [1 ]
机构：
[1] Brawijaya Univ, Fac Engn, Mech Engn Dept, MT Haryono 167, Malang 65145, Indonesia
来源：
RESULTS IN ENGINEERING | 2023年 / 17卷
关键词：
Arc spray; Fe-based; HVOF; Ni-based; Tube coating; OXIDATION; CORROSION;
D O I：
10.1016/j.rineng.2023.100985
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
SA 210C is the material for tube boiler which is generally coated with Fe-based and Ni-based to increase its resistance at high temperature. The methods of thermal spray coating which is mostly performed on the material is wire arc (WA) spray and high velocity oxy-fuel (HVOF) have different cost and coating characteristics. Thermal spray coating with Ni-based is used more. In this study, Fe-based and Ni-based were deposited using WA and HVOF spray, respectively. Compared to Ni-based, Fe-based coating had more porosity. The amount of the porosity supports the findings stating that abrasion rate of Fe-based is higher than Ni-based. The hardness values of Fe-based (200.15 HV) and Ni-based (201.36 HV) are almost the same. The coating quality was assessed based on the evaluation of micro and crystal structure and the effect is revealed in this paper. The Fe-based coating with WAS can be the alternative technique to replace Ni-based with HVOF method.
引用
收藏
页数：6
相关论文
共 33 条
[1]   Oxidation and corrosion protection of ZG12Cr9Mo1Co1NiVNbNB (CB2) ferritic stainless steel by inorganic composite coatings at 650 °C [J].
Chen, Yiwen ;
Lou, Xia ;
Yang, Lanlan ;
Wang, Cheng ;
Zhou, Ke ;
Chen, Minghui ;
Wang, Qunchang ;
Zhu, Shenglong ;
Wang, Fuihui .
CORROSION SCIENCE, 2020, 177
[2]   Environmentally assisted product failure - Synopsis and case study compendium [J].
Gagg, Colin R. ;
Lewis, Peter R. .
ENGINEERING FAILURE ANALYSIS, 2008, 15 (05) :505-520
[3]   The effect of hot dip galvanizing temperature to corrosion rate of steel as the material for chopper machine [J].
Gapsari F. ;
Setyarini P.H. ;
Anam K. ;
Azizah S. ;
Yuliati R. .
Solid State Phenomena, 2019, 291 :148-154
[4]   Prediction of Thermal Spray Coatings Performance in Marine Environments by Combination of Laboratory and Field Tests [J].
Grinon-Echaniz, Rosa ;
Paul, Shiladitya ;
Thornton, Rob ;
Refait, Philippe ;
Jeannin, Marc ;
Rodriguez, Alvaro .
COATINGS, 2021, 11 (03)
[5]   Fabrication and characterization of Fe-based amorphous coatings prepared by high-velocity arc spraying [J].
Guo, Wenmin ;
Zhang, Jianfeng ;
Wu, Yuping ;
Hong, Sheng ;
Qin, Yujiao .
MATERIALS & DESIGN, 2015, 78 :118-124
[6]   Microstrutural, mechanical characterizations and corrosion behaviour of borides layers on Inconel 718 superalloy [J].
Jeronimo, Jefferson Luiz ;
Krelling, Anael Preman ;
Pacheco, Christian ;
Bonetti, Ivandro ;
da Silva, Rodrigo ;
Milan, Julio Cesar Giubilei ;
da Costa, Cesar Edil .
RESULTS IN ENGINEERING, 2022, 16
[7]   Corrosion properties of HVOF-coated steel in simulated concrete pore electrolyte and concentrated chloride environments [J].
Khaled, Mazen M. ;
Yibas, Bekir S. .
SURFACE & COATINGS TECHNOLOGY, 2007, 202 (03) :433-438
[8]  
Kumar Rajinder, 2021, IOP Conference Series: Materials Science and Engineering, V1033, DOI 10.1088/1757-899X/1033/1/012064
[9]   Corrosion of high-velocity-oxygen-fuel (HVOF) sprayed non-crystalline alloy coating in marine environment [J].
Lee, Hung-Bin ;
Lin, Tzu-Jing ;
Lee, Chun-Ying .
SURFACE & COATINGS TECHNOLOGY, 2021, 409
[10]   Microstructure and high-temperature oxidation behavior of wire-arc sprayed Fe-based coatings [J].
Li, Ran ;
Zhou, Zheng ;
He, Dingyong ;
Zhao, Lidong ;
Song, Xiaoyan .
SURFACE & COATINGS TECHNOLOGY, 2014, 251 :186-190
1234