INFLUENCE OF THE SHAPE OF THE COPPER COMPONENT ON MECHANICAL PROPERTIES OF THE FRICTION MATERIAL USED IN DISC BRAKES

被引：2

作者：

Borawski, Andrzej ^{[1
]}

机构：

[1] Bialystok Tech Univ, Fac Mech Engn, Bialystok, Poland

来源：

JOURNAL OF THEORETICAL AND APPLIED MECHANICS | 2023年 / 61卷 / 04期

关键词：

friction materials; composite; mechanical strength; material properties; PERFORMANCE; PADS;

D O I：

10.15632/jtam-pl/172571

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Brakes are an important safety feature of vehicles. The materials of which the friction elements are made pose some risk to the environment. This can be a case during manufacture, operation and disposal. Any step to improve the ecology deserves thorough examination and possible introduction into production. For this reason, it has been decided to investigate whether it is possible to replace aramid with another material that is already present in its composition. The choice fell on copper, which was used in prepared samples in the form of both powder and fibers.

引用

页码：807 / 818

页数：12

共 50 条

[41] Net shape HIPping of a Ni-superalloy: A study of the influence of an as-leached surface on mechanical properties
Bassini, E.
Iannucci, L.
Lombardi, M.
Biamino, S.
Ugues, D.
Vallillo, G.
Picque, B.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 271 : 476 - 487
[42] Influence of Cross-Sectional Shape on the Mechanical Properties of Concrete Canvas and CFRP-Reinforced Columns
Niu, Jiangang
Xu, Wenming
Li, Jingjun
Liang, Jian
[J]. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2021, 2021
[43] Influence of sintering temperature on mechanical and tribological characteristics of copper based composite reinforced by 2D hybrid material
Nautiyal, H.
Gautam, R. K. S.
Singh, S.
Goswami, R.
Gautam, G.
Raturi, A.
Khatri, O. P.
Tyagi, R.
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024, 238 (04) : 1747 - 1755
[44] Material flow, microstructure and mechanical properties of friction stir welded AA 2024-T3 enhanced by ultrasonic vibrations
Gao, S.
Wu, C. S.
Padhy, G. K.
[J]. JOURNAL OF MANUFACTURING PROCESSES, 2017, 30 : 385 - 395
[45] Microstructure and mechanical properties of copper surface composite layers reinforced by nano and microscale SiC particles via friction stir processing
Shamsipur, Ali
Asadkarami, Sanaz
[J]. ADVANCED COMPOSITE MATERIALS, 2019, 28 (06) : 591 - 606
[46] The Influence of the Material Structure on the Mechanical Properties of Geopolymer Composites Reinforced with Short Fibers Obtained with Additive Technologies
Korniejenko, Kinga
Kejzlar, Pavel
Louda, Petr
[J]. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 2022, 23 (04)
[47] Influence of Shape Factor on Mechanical and Electrical Properties of Cu-W Composites with Micro-oriented Structure
Han Y.
Li S.
Cao Y.
Li S.
Lu Y.
Sun B.
[J]. Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2022, 36 (08): : 571 - 578
[48] Characterization of thick titanium plasma spray coatings on PEEK materials used for medical implants and the influence on the mechanical properties
Vogel, Danny
Dempwolf, Henry
Baumann, Axel
Bader, Rainer
[J]. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2018, 77 : 600 - 608
[49] Improved mechanical and electrical properties of copper-aluminum joints with highly aligned graphene reinforcement via friction stir spot welding
Isa, Mohammad Syahid Mohd
Muhamad, Mohd Ridha
Yusof, Farazila
Yusoff, Nukman
Brytan, Zbigniew
Suga, Tetsuo
Morisada, Yoshiaki
Fujii, Hidetoshi
[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 9203 - 9215
[50] Fly Ash/Paraffin Composite Phase Change Material Used to Treat Thermal and Mechanical Properties of Expansive Soil in Cold Regions
Chen, Yong
Huang, Yinghao
Wu, Min
Wang, Shuo
[J]. JOURNAL OF RENEWABLE MATERIALS, 2022, 10 (04) : 1153 - 1173

← 1 2 3 4 5 →