Evaluation of Characteristics of Sludge generated from Active Treatment System of Mine Drainage

Acid mine drainage(AMD) treatment is classified as both passive and active treatment. During the treatment, about 5,000 tons of neutralization sludge is generated as a by-product per year in Korea. This study was conducted to evaluate the characteristics of sludge generated from physico center dot chemical treatment processes as an active treatment from 5 different sources (D, H, S, T, Y) and the possibility of the sludges being recycled. The sludges have a pH range of 5.86 similar to pH 7.89, and a water content range of 51% similar to 82%. Most of particle sizes were less than 25 mu m. In analysis of inorganic elements, the concentration of Al, Fe, and Mn were between 1,189 mg/kg similar to 129,344 mg/kg, 106,132 mg/kg similar to 338,011 mg/kg, and 3,472 mg/kg similar to 11,743 mg/kg, respectively. The concentration of As and Zn in sludge-T, Cd in sludge-D, Ni in sludge-H, Zn in sludge-S, and Cd in sludge-Y exceeded the soil contamination standards of Korea. The results from 2 separate kinds of leaching test, the Korea Standard Leaching Test(KSLT) and Toxicity Characteristic Leaching Procedure(TCLP), showed that all the sludges met the Korea groundwater standards. From the XRD and SEM-EDS analysis, the peaks of calcite and quartz were found in the sludges. The sludge also had a high proportion of Fe and O, and the majority of the composition was amorphous iron hydroxide.