Durability performance of multi-walled carbon nanotube reinforced ordinary Portland/calcium sulfoaluminate cement composites to sulfuric acid attack at early stage

被引:16
作者
Cao, Runzhuo [1 ]
Yang, Junfen [1 ,2 ]
Li, Guoxin [1 ]
Zhou, Qun [3 ]
Niu, Mengdie [1 ]
机构
[1] Xian Univ Architecture & Technol, Sch Mat Sci & Engn, Xian, Peoples R China
[2] Xian Univ Architecture & Technol, Sch Civil Engn, Xian, Peoples R China
[3] Xian Siyuan Univ, Sch Sci & Engn, Xian, Peoples R China
关键词
Multi-walled carbon nanotubes; Composites; Sulfuric acid; Microstructure; Degradation; MECHANICAL-PROPERTIES; CORROSION-RESISTANCE; CONCRETE; CNT; DEGRADATION; HYDRATION; CONSTRUCTION; MORTARS; SYSTEMS; PH;
D O I
10.1016/j.mtcomm.2023.105748
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Exposure of cement-based structures to sulfuric acid environments can cause significant degradation. Therefore, this study focuses on the effect of multi-walled carbon nanotubes (MWCNTs) on the sulfuric acid resistance of ordinary Portland cement (OPC)-sulfoaluminate cement (SAC) composites (as repair material) at early stage. Samples were exposed to three concentrations of acid solution for 60 days. The degradation kinetics, chemistry, and microstructures of the composites were analyzed. The results of degradation kinetics (dimensional change, mass and strength loss) showed that the MWCNTs modified composites had a lower degradation rate compared to the composites without MWCNTs. XRD, TG, X-CT and SEM analysis showed that MWCNTs promoted hy-dration, improved structure compactness, interrupted the generation and propagation of microcracks through the bridge effect, and formed protective barriers. The degradation rate of the composite was reduced by the double optimization of chemistry and microstructure. However, diffusion-dissolution-precipitation is still the main mode of degradation in composites subjected to sulfuric acid attack, regardless of MWCNT content mixed into the composite system.
引用
收藏
页数:11
相关论文
共 60 条
[1]   Effect of slag content and activator dosage on the resistance of fly ash geopolymer binders to sulfuric acid attack [J].
Aiken, Timothy A. ;
Kwasny, Jacek ;
Sha, Wei ;
Soutsos, Marios N. .
CEMENT AND CONCRETE RESEARCH, 2018, 111 :23-40
[2]   Resistance of geopolymer and Portland cement based systems to silage effluent attack [J].
Aiken, Timothy A. ;
Sha, Wei ;
Kwasny, Jacek ;
Soutsos, Marios N. .
CEMENT AND CONCRETE RESEARCH, 2017, 92 :56-65
[3]   Performance of sewer pipe concrete mixtures with portland and calcium aluminate cements subject to mineral and biogenic acid attack [J].
Alexander, M. G. ;
Fourie, C. .
MATERIALS AND STRUCTURES, 2011, 44 (01) :313-330
[4]   Nano-SiO2 contribution to mechanical, durability, fresh and microstructural characteristics of concrete: A review [J].
Balapour, Mohammad ;
Joshaghani, Alireza ;
Althoey, Fadi .
CONSTRUCTION AND BUILDING MATERIALS, 2018, 181 :27-41
[5]   Performance optimization of hybrid fiber concretes against acid and sulfate attack [J].
Bankir, Muzeyyen Balcikanli ;
Sevim, Umur Korkut .
JOURNAL OF BUILDING ENGINEERING, 2020, 32
[6]   Resistance of self-consolidating concrete to sulfuric acid attack with consecutive pH reduction [J].
Bassuoni, M. T. ;
Nehdi, M. L. .
CEMENT AND CONCRETE RESEARCH, 2007, 37 (07) :1070-1084
[7]   Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag - Part II: Effect of Al2O3 [J].
Ben Haha, M. ;
Lothenbach, B. ;
Le Saout, G. ;
Winnefeld, F. .
CEMENT AND CONCRETE RESEARCH, 2012, 42 (01) :74-83
[8]   Characterization of modified calcium-silicate cements exposed to acidic environment [J].
Camilleri, Josette .
MATERIALS CHARACTERIZATION, 2011, 62 (01) :70-75
[9]   Resistance of the composite cementitious system of ordinary Portland/ calcium sulfoaluminate cement to sulfuric acid attack [J].
Cao, Runzhuo ;
Yang, Junfen ;
Li, Guoxin ;
Liu, Feipeng ;
Niu, Mengdie ;
Wang, Wenzhao .
CONSTRUCTION AND BUILDING MATERIALS, 2022, 329
[10]   Accelerated performance evaluation of repair mortars for concrete sewer pipes subjected to sulfuric acid attack [J].
Chang, Han Byeol ;
Choi, Young Cheol .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (06) :13635-13645