In-situ investigation of tensile anisotropy mechanism in an advanced Ti2AlNb-based alloy associated with CRSS ratio and damage model

Combined with in-situ tensile test and electron backscatter diffraction technology, the critical resolved shear stress (CRSS) ratio of O phase and the damage model of grain boundaries were proposed to reveal the tensile anisotropy mechanism of Ti-22Al-25Nb alloy isothermally forged in B2 phase region. In-situ observation suggests that the single slip mode of lamellar O phase is the major deformation behavior, and its preferential slip dominates the yield of the material. Based on the types, number, Schmid factor (SF) and orientation of slip activation, the CRSS ratio of basal , prism , first-order and second-order pyramidal slips for O phase is estimated to be 1.19: 1: 1.37: 1.39. Meanwhile, basal and prism slips mainly appear the radial and axial directions (RD and AD) samples with [012] and [100] texture, while the [001], [010] and [212] texture of OD (45 to RD) sample shows an increase in pyramidal slips. Thus, the slip activation of O phase depends on the grain orientation and CRSS, resulting in significant strength anisotropy. Furthermore, the microcracks and secondary cracks at grain boundaries are significantly affected by the slip accumulation of lamellar O phase at the O/O and O/B2 interfaces. Considering the stress state of the grain boundary, a damage model about crack nucleation and propagation is proposed to explain the ductility anisotropy. From this, the RD sample has a higher crack nucleation and propagation resistance than the AD and OD samples due to the flattened morphology of B2 grains.