Design of a Wideband Balun Using IPD Technology for Compensating the Frequency Dependency

被引:0
作者
Jang, Youna [1 ]
Jeong, Kwanhun [1 ]
Lee, Yea-ji [1 ]
Kang, Taehoon [1 ]
Lee, Sangmin [2 ]
Koo, Seo [3 ]
Ahn, Dal [4 ]
机构
[1] Soonchunhyang Univ, Dept ICT Convergence, Asan, South Korea
[2] Wavice Inc, Hwasung, South Korea
[3] Soonchunhyang Univ, Dept Elect & Commun Syst Engn, Asan, South Korea
[4] Soonchunhyang Univ, Dept Elect Engn, Asan, South Korea
来源
JOURNAL OF ELECTROMAGNETIC ENGINEERING AND SCIENCE | 2023年 / 23卷 / 02期
基金
新加坡国家研究基金会;
关键词
Balun; Integrated Passive Device (IPD); Wideband; CHIP;
D O I
10.26866/jees.2023.2.r.156
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
In this paper, we propose a wideband balun using integrated passive device (IPD) technology. The proposed circuit is designed to compensate for the magnitude deviations by differentiating the magnitude S-parameter and calculating the lumped component value when the derivative value is zero. For a smaller size, the proposed circuit is implemented using IPD technology, and the fabricated circuit's size is 2.4 mm x 1.02 mm. The magnitude of the measurement results has 3.5 +/- 0.3 dB deviations from 2.8-4.58 GHz, and the phase difference has 180 degrees +/- 10 degrees from 2.8-5 GHz at the center frequency of 3.6 GHz. Therefore, the measurement results show that the theory of the proposed circuit is well matched compared with the measurement results for smaller sizes, wideband magnitude, and phase characteristics.
引用
收藏
页码:165 / 170
页数:6
相关论文
共 12 条
[1]  
Kofol J. S., 1992, GaAs IC Symposium. 14th Annual IEEE Gallium Arsenide Integrated Circuit Symposium Technical Digest (Cat. No.92CH3197-1), P267, DOI 10.1109/GAAS.1992.247272
[2]   Design Analysis of Integrated Passive Device-Based Balun Devices With High Selectivity for Mobile Application [J].
Kumar, Alok ;
Meng, Fan-Yi ;
Wang, Cong ;
Adhikari, Kishor Kumar ;
Qiang, Tian ;
Wu, Qun ;
Wu, Yongle .
IEEE ACCESS, 2019, 7 :23169-23176
[3]   A high performance compact Wilkinson power divider using GaAs-based optimized integrated passive device fabrication process for LTE application [J].
Li, Yang ;
Wang, Cong ;
Kim, Nam-Young .
SOLID-STATE ELECTRONICS, 2015, 103 :147-153
[4]   Broad-band band-pass and band-stop filters with sharp cut-off frequencies based on series CPW stubs [J].
Liu, A. Q. ;
Yu, A. B. ;
Zhang, Q. X. .
2006 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST, VOLS 1-5, 2006, :353-+
[5]  
Park Jong C., 2007, 2007 International Microwave Symposium (IMS 2007), P1901, DOI 10.1109/MWSYM.2007.380144
[6]   Analysis and design of miniaturized lumped-distributed impedance-transforming baluns [J].
Sen Ang, K ;
Leong, YC ;
Lee, CH .
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2003, 51 (03) :1009-1017
[7]  
Shinchi K, 2019, PREHOSP DISASTER MED, V34, P438, DOI [10.1017/S1049023X19004564, 10.1109/wamicon.2019.8765433]
[8]  
Tang CW, 2002, IEEE MTT S INT MICR, P2201, DOI 10.1109/MWSYM.2002.1012309
[9]   LTCC-MLC chip-type balun realised by LC resonance method [J].
Tang, CW ;
Chang, CY .
ELECTRONICS LETTERS, 2002, 38 (11) :519-520
[10]  
Won Na, 2007, 2007 International Microwave Symposium (IMS 2007), P1769