WEAR OF 16MnCrS5 STEEL SURFACE LAYERS IN THE PULSING CONTACT LOADS

被引：0
|
作者：
Stepankin, I. [2 ]
Kuis, D. [3 ]
Pozdnyakov, E. [4 ]
Naizabekov, A. [1 ]
Lezhnev, S. [1 ]
Panin, E. [5 ]
机构：
[1] Rudny Ind Inst, Rudny, Kazakhstan
[2] Belorusneft, Gomel, BELARUS
[3] Belarusian State Technol Univ, Minsk, BELARUS
[4] Pavel Sukhoi State Tech Univ Gomel, Gomel, BELARUS
[5] Karaganda Ind Univ, Temirtau, Kazakhstan
来源：
METALURGIJA | 2023年 / 62卷 / 3-4期
关键词：
16MnCrS5; wear; layers on surface; pulsing contact loads; thermal treatment;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Approaches to actualizing the use of modern alloy steels that are in demand in the Eurasian technological space are proposed. According to the criterion of resistance to contact fatigue, quantitative indicators of wear of the surface -hardened layers of steel 16MnCrS5 were revealed. With the contact stress amplitude up to 950 MPa, the composite material of carbonized and nitrocemented layers is characterized by a period of high resistance with minimal mani-festations of structural hardening by the mechanism of softening of the material. The obtained composite material with carbonized and nitrocemented layers is characterized by a period of high resistance up to 15 000 cycles.
引用
收藏
页码：437 / 439
页数：3
相关论文
共 50 条
  • [1] Modification of Inclusions by Adding Mg to 16MnCrS5 Gear Steel
    Liu, Hui
    Xie, Yikui
    Yang, Qiankun
    Zhou, Qi
    Ma, Jie
    11TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2020, : 595 - 604
  • [2] INCREASING THE TENSILE STRENGTH AND ELONGATION OF 16MnCrS5 STEEL USING GENETIC PROGRAMMING
    Kovacic, Miha
    Tursek, Ana
    Ocvirk, Darja
    Gantar, Gasper
    MATERIALI IN TEHNOLOGIJE, 2017, 51 (06): : 883 - 888
  • [3] Exploration of morphology evolution of the inclusions in Mg-treated 16MnCrS5 steel
    Xie, Jian-bo
    Zhang, Dong
    Yang, Qian-kun
    An, Jin-min
    Huang, Zong-ze
    Fu, Jian-xun
    IRONMAKING & STEELMAKING, 2019, 46 (06) : 564 - 573
  • [4] On the automated characterisation of inclusion-induced damage in 16MnCrS5 case-hardening steel
    Wollenweber, Maximilian A.
    Kusche, Carl F.
    Al-Samman, Talal
    Korte-Kerzel, Sandra
    ADVANCES IN INDUSTRIAL AND MANUFACTURING ENGINEERING, 2023, 7
  • [5] Influence of Non-Metallic Inclusions on Local Deformation and Damage Behavior of Modified 16MnCrS5 Steel
    Qayyum, Faisal
    Umar, Muhammad
    Elagin, Vladislav
    Kirschner, Markus
    Hoffmann, Frank
    Guk, Sergey
    Prahl, Ulrich
    CRYSTALS, 2022, 12 (02)
  • [6] An investigation of reduced cutting tool life in the machining of a 16MnCrS5 steel piston used in a door closer
    Hang, Yun
    Wu, Xuan
    Chen, Zhian
    Zhu, Hengliang
    Waleed, Al-seriyhi
    Maqsood, Ali
    Northwood, Derek O.
    Liu, Cheng
    ENGINEERING FAILURE ANALYSIS, 2025, 170
  • [7] 汽车用齿轮钢16MnCrS5热处理变形机理
    屈小波
    安金敏
    王林
    李喜
    金属学报, 2025, 61 (04) : 597 - 607
  • [8] Calculation of the fatigue strength of notched and multiaxially loaded specimens made of case-hardened steel 16MnCrS5
    Schleicher, M.
    Bomas, H.
    Mayr, P.
    HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS, 2022, 56 (02): : 84 - 94
  • [9] Improving Cleanliness of 16MnCrS5 Case Hardening Steels by Optimized Active Tundish Flux
    Kekkonen, Marko
    Leuverink, Dirk
    Holappa, Lauri
    STEEL RESEARCH INTERNATIONAL, 2017, 88 (07)
  • [10] Load Direction-Dependent Influence of Forming-Induced Initial Damage on the Fatigue Performance of 16MnCrS5 Steel
    Moehring, Kerstin
    Walther, Frank
    MATERIALS, 2020, 13 (12) : 1 - 19
12345