Incorporating a weak acceptor unit into PTB7-Th to tune the open circuit voltage for non-fullerene polymer solar cells

被引:1
作者
Tang, Yuan [1 ]
Liu, Longfei [2 ]
Deng, Jiyong [1 ]
Sun, Penghao [1 ]
Yan, Dong [1 ]
Peng, Wenhong [1 ]
Huang, Xianwei [1 ]
Xiao, Manjun [2 ]
Tao, Qiang [1 ]
Yu, Donghong [3 ,4 ]
机构
[1] Hunan Inst Engn, Sch Mat & Chem Engn, Xiangtan 411104, Peoples R China
[2] Xiangtan Univ, Dept Chem, Xiangtan 411105, Peoples R China
[3] Aalborg Univ, Dept Chem & Biosci, DK-9220 Aalborg, Denmark
[4] Sino Danish Ctr Educ & Res SDC, DK-8000 Aarhus, Denmark
关键词
Polymer donors; PTB7-Th; Weak acceptor unit; Open circuit voltage; Non-fullerene polymer solar cells; HIGHLY EFFICIENT; COPOLYMERS; DESIGN; MORPHOLOGY;
D O I
10.1016/j.tet.2022.133214
中图分类号
O62 [有机化学];
学科分类号
070303 ; 081704 ;
摘要
PTB7-Th is one of the most effective polymer donors which have drawn huge attention in organic solar cells. However, the highest occupied molecular orbital (HOMO) level of PTB7-Th is relatively high, which limit open circuit voltage (Voc) of the cell devices. In this work, to develop the new members of PTB7-Th family materials with higher Vocs, two new random terpolymers PTB7-Th(0.9) and PTB7-Th(0.8) have been synthesized, in which contains 10% or 20% benzo[1,2-b:4,5-b']dithiophene-2,6-dicarboxylate (VBDTC, a weak acceptor unit) moiety in PTB7-Th. It was found that the incorporating of VBDTC unit has great influence on optical and electronic properties of the related polymers. Comparison with PTB7-Th, the PTB7-Th(0.9) and PTB7-Th(0.8) exhibit blue shift in the UV-visible spectra, which forming a more complementary absorption with the low band gap non-fullerene acceptors, like ITIC and Y6. Increasing the percentage of VBDTC moiety, it can sufficiently deepen the low-lying HOMO level of the related polymers, which would expect to an enhancement in Voc. Non-fullerene solar cells blended with ITIC, PTB7-Th(0.9) exhibited a Voc of 0.839 V, with power conversion efficiency (PCE) of 4.86%. Interestingly, PTB7-Th(0.8) showed superior photovoltaic performance with a Voc of 0.862 V, and PCE of 5.24%. And when blended with Y6, the PCE of PTB7-Th(0.8) based device was further improved to 6.13%, due to increasing the short-circuit current (Jsc). The comprehensive study reveals that it is an effective strategy to tune the absorption spectra and deepens the HOMO energy level of the PTB7-Th related polymers by incorporation of a weak acceptor unit, thus, achieving higher Voc as well as photovoltaic performance. (c) 2022 Elsevier Ltd. All rights reserved.
引用
收藏
页数:7
相关论文
共 50 条
  • [1] Influence of the acceptor crystallinity on the open-circuit voltage in PTB7-Th: ITIC organic solar cells
    Wang, Xiaojing
    Yang, Yidong
    He, Zhicai
    Wu, Hongbin
    Cao, Yong
    JOURNAL OF MATERIALS CHEMISTRY C, 2019, 7 (47) : 14861 - 14866
  • [2] High performance non-fullerene polymer solar cells based on PTB7-Th as the electron donor with 10.42% efficiency
    Sun, Jia
    Zhang, Zhuohan
    Yin, Xinxing
    Zhou, Jie
    Yang, Linqiang
    Geng, Renyong
    Zhang, Fujun
    Zhu, Rihong
    Yu, Jiangsheng
    Tang, Weihua
    JOURNAL OF MATERIALS CHEMISTRY A, 2018, 6 (06) : 2549 - 2554
  • [3] The effect of polymer molecular weight on the performance of PTB7-Th:O-IDTBR non-fullerene organic solar cells
    Hoefler, Sebastian F.
    Rath, Thomas
    Pastukhova, Nadiia
    Pavlica, Egon
    Scheunemann, Dorothea
    Wilken, Sebastian
    Kunert, Birgit
    Resel, Roland
    Hobisch, Mathias
    Xiao, Steven
    Bratina, Gvido
    Trimmel, Gregor
    JOURNAL OF MATERIALS CHEMISTRY A, 2018, 6 (20) : 9506 - 9516
  • [4] Impact of non-fullerene acceptors and solvent additive on the nanomorphology, device performance, and photostability of PTB7-Th polymer based organic solar cells
    Khan, Javed Alam
    Sharma, Ramakant
    Panwar, Ajay Singh
    Gupta, Dipti
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2022, 55 (49)
  • [5] A spirobifluorene and diketopyrrolopyrrole moieties based non-fullerene acceptor for efficient and thermally stable polymer solar cells with high open-circuit voltage
    Li, Shuixing
    Liu, Wenqing
    Shi, Minmin
    Mai, Jiangquan
    Lau, Tsz-Ki
    Wan, Junhua
    Lu, Xinhui
    Li, Chang-Zhi
    Chen, Hongzheng
    ENERGY & ENVIRONMENTAL SCIENCE, 2016, 9 (02) : 604 - 610
  • [6] A narrow-bandgap donor polymer for highly efficient as-cast non-fullerene polymer solar cells with a high open circuit voltage
    Chang, Chunmei
    Li, Wanbin
    Guo, Xia
    Guo, Bing
    Ye, Chennan
    Su, Wenyan
    Fan, Qunping
    Zhang, Maojie
    ORGANIC ELECTRONICS, 2018, 58 : 82 - 87
  • [7] Photostability of Fullerene and Non-Fullerene Polymer Solar Cells: The Role of the Acceptor
    Doumon, Nutifafa Y.
    Dryzhov, Mikhail V.
    Houard, Felix V.
    Le Corre, Vincent M.
    Chatri, Azadeh Rahimi
    Christodoulis, Panagiotis
    Koster, L. Jan Anton
    ACS APPLIED MATERIALS & INTERFACES, 2019, 11 (08) : 8310 - 8318
  • [8] Acceptor Gradient Polymer Donors for Non-Fullerene Organic Solar Cells
    Jones, Austin L.
    Zheng, Zilong
    Riley, Parand
    Pelse, Ian
    Zhang, Junxiang
    Abdelsamie, Maged
    Toney, Michael F.
    Marder, Seth R.
    So, Franky
    Bredas, Jean-Luc
    Reynolds, John R.
    CHEMISTRY OF MATERIALS, 2019, 31 (23) : 9729 - 9741
  • [9] Quaternary Solar Cells with 12.5% Efficiency Enabled with Non-Fullerene and Fullerene Acceptor Guests to Improve Open Circuit Voltage and Film Morphology
    Li, Weiping
    Liu, Wenxu
    Zhang, Xin
    Yan, Dong
    Liu, Feng
    Zhan, Chuanlang
    MACROMOLECULAR RAPID COMMUNICATIONS, 2019, 40 (21)
  • [10] Tuning the open circuit voltage by incorporating a diflurophenyl unit into a polymer backbone to achieve high efficiency polymer solar cells
    Hossain, Maimur
    Afroz, Mohammad Adil
    Garai, Rabindranath
    Iyer, Parameswar Krishnan
    SUSTAINABLE ENERGY & FUELS, 2021, 5 (03): : 874 - 879