Air side performance of fin-and-tube heat exchangers with a hydrophilic layer under low-temperature frost-free conditions

被引:6
|
作者
Hu, Wanling [1 ,2 ]
Wang, Jing [1 ]
Zhang, Yibo [1 ]
Guan, Yong [1 ,3 ]
Lin, Yuanshan [1 ]
Zhao, Shengying [1 ]
机构
[1] Lanzhou Jiaotong Univ, Sch Environm & Municipal Engn, Lanzhou 730070, Peoples R China
[2] Lanzhou Jiaotong Univ, Key Lab Railway Vehicle Thermal Engn, Minist Educ China, Lanzhou 730070, Peoples R China
[3] Key Lab Yellow River Water Environm Gansu Prov, Lanzhou 730070, Peoples R China
基金
中国国家自然科学基金;
关键词
Air side performance; Correlations; Fin-and-tube heat exchangers; Low-temperature frost-free conditions; MASS-TRANSFER CHARACTERISTICS; WAVY FIN; FRICTION CHARACTERISTICS; WET; GREENHOUSE; NANOFLUID; FLOW;
D O I
10.1016/j.applthermaleng.2022.119532
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this paper, to provide a reference for the application and thermal design of fin-and-tube heat exchangers (FTHEs) under low-temperature frost-free conditions (LTFFCs) and to improve the dehumidification performance of cooling dehumidifiers in greenhouse environments of low temperature and high humidity, the air side per-formance of FTHEs with a hydrophilic layer under LTFFCs was experimentally investigated. The experimental findings were compared with the results of ordinary temperature conditions (OTCs). The critical environmental conditions for frosting FTHEs were obtained. The applicability of existing performance prediction correlations under the LTFFCs was discussed and corrected. The findings show that at the same inlet temperature difference between air and refrigerant, the LTFFCs have smaller heat transfer rates than the OTCs. Varying inlet conditions showed that in the test conditions range, the test FTHEs are at risk of frosting when the inlet air relative humidity is 95 %, inlet air temperature is 281 K, frontal velocity is 1 m/s, and inlet refrigerant temperature is as low as 270 K. The data analysis revealed that existing correlations could not accurately predict the experimental data under LTFFCs. By adding the correction coefficients for temperature and relative humidity to existing correla-tions, the corrected correlations describe the experimental data for 90.6 % and 87.5 % of the heat transfer factor and mass transfer factor, respectively, within +/- 20 %, and the deviation of all friction factors is within +/- 10 %. The mean deviations of the heat transfer factor, mass transfer factor, and friction factor are 8.2 %, 10.8 %, and 4.8 %, respectively.
引用
收藏
页数:12
相关论文
共 50 条
  • [41] An experimental study of the air-side performance of fin-and-tube heat exchangers having plain, louver, and semi-dimple vortex generator configuration
    Wang, Chi-Chuan
    Chen, Kuan-Yu
    Liaw, Jane-Sunn
    Tseng, Chih-Yung
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 80 : 281 - 287
  • [42] Innovative analysis of local and average air-side heat transfer coefficients in fin-and-tube heat exchangers using CFD and experimental method
    Marcinkowski, Mateusz
    Taler, Dawid
    Sacharczuk, Jacek
    Weglarz, Katarzyna
    Taler, Jan
    ENERGY, 2024, 309
  • [43] Airside characteristics of heat, mass transfer and pressure drop for heat exchangers of tube-in hydrophilic coating wavy fin under dehumidifying conditions
    Ma, Xiaokui
    Ding, Guoliang
    Zhang, Yuanming
    Wang, Kaijian
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (19-20) : 4358 - 4370
  • [44] Frost growth characteristics of spirally-coiled circular fin-tube heat exchangers under frosting conditions
    Lee, Sang Hun
    Lee, Mooyeon
    Yoon, Won Jae
    Kim, Yongchan
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 64 : 1 - 9
  • [45] Air-side heat transfer characteristics of flat plate finned-tube heat exchangers with large fin pitches under frosting conditions
    Lee, Mooyeon
    Kim, Yonghan
    Lee, Hosung
    Kim, Yongchan
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (13-14) : 2655 - 2661
  • [46] An experimental, computational and flow visualization study on the air-side thermal and hydraulic performance of louvered fin and round tube heat exchangers
    Okbaz, Abdulkerim
    Pinarbasi, Ali
    Olcay, Ali Bahadir
    Aksoy, Muharrem Hilmi
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 121 : 153 - 169
  • [47] Effect of number of tube rows on the air-side performance of crimped spiral fin-and-tube heat exchanger with a multipass parallel and counter cross-flow configuration
    Pongsoi, Parinya
    Pikulkajorn, Santi
    Wang, Chi-Chuan
    Wongwises, Somchai
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (04) : 1403 - 1411
  • [48] Effect of a micro-grooved fin surface design on the air-side thermal-hydraulic performance of a plain fin-and-tube heat exchanger
    Yu, R.
    Sommers, A. D.
    Okamoto, N. C.
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2013, 36 (03): : 1078 - 1089
  • [49] Performance assessment of R1234ze(E) as a low GWP substitute to R410A in fin-and-tube heat exchangers
    Saleem, Saad
    Bradshaw, Craig R.
    Bach, Christian K.
    INTERNATIONAL JOURNAL OF REFRIGERATION, 2022, 134 : 253 - 264
  • [50] Numerical Study of Fin-and-Tube Heat Exchanger in Low-Pressure Environment: Air-Side Heat Transfer and Frictional Performance, Entropy Generation Analysis, and Model Development
    Zhang, Lei
    Wang, Junwei
    Liu, Ran
    Li, Guohua
    Han, Xiao
    Zhang, Zhiqiang
    Zhao, Jiayi
    Dai, Baomin
    ENTROPY, 2022, 24 (07)