A comprehensive assessment, source input determination and distribution of persistent organic pollutants (POPs) along with heavy metals (HMs) in reservoir lake sediments from canakkale province, Turkiye

This study presents the distribution of persistent organic pollutants (POPs), polycyclic aromatic hydrocarbons (PAHs) and heavy metals (HMs) in the sediments from four dams and two ponds in the Canakkale city, Turkiye. The total concentration varied from 41.47 to 145.45 ng/g d.w. for PAHs; 1.40- 14.96 ng/g d.w. for organochlorine pesticides (OCPs) and 0.13-3.31 ng/g d.w. for polychlorinated biphenyls (PCBs). The total polychlorinated dibenzo-p-dioxins/ furans ( n-expressionry sumexpressiontion PCDD/Fs) concentrations varied between 7.35 and 63.46 pg/g d.w. The HM distribution in sediments ranged from 9.41 to 21.13 mg/kg d.w. for As; 0.20-0.39 mg/kg d.w. for Cd; 19.4-281.68 mg/ kg d.w. for Cr; 23.50-118.25 mg/kg d.w. for Pb and 118.9-374.82 mg/kg d.w. for Zn. This paper also elucidates possible sources of POP and HMs in sediment by using diagnostic ratios. The calculated ratios were shown that anthropogenic input is the source of these pollutants in sediments. Principal component analysis showed that the low molecular weight of POPs is considerably related and correlated, while high molecular weight pollutants have made another group and highly correlated with each other. The results indicated that anthropogenic pollution is mainly related to atmospheric input. Anthropogenic pollutants are more apparent at Atikhisar and Bakacak dams close to urbanized locations. Rather than the anthropogenic impact, based on the measured data interpretation, the global climate change effect was seen in Bakacak dam. The overall concentration of all pollutants revealed that Atikhisar and Bakacak sediments are high-level polluted areas according to several types of sediment guidelines.