Leakage Characteristics of Proportional Directional Valve

被引:7
作者
Ledvon, Marian [1 ]
Hruzik, Lumir [1 ]
Burecek, Adam [1 ]
Dyrr, Filip [1 ]
Polasek, Tomas [1 ]
机构
[1] VSB Tech Univ Ostrava, Fac Mech Engn, Dept Hydromech & Hydraul Equipment, 17 Listopadu 2172-15, Ostrava 70800, Czech Republic
关键词
proportional directional valve; spool lap; axial clearance; experimental analysis; leakage characteristics; analytical analysis; SPOOL VALVE; FLOW;
D O I
10.3390/pr11020512
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
This paper deals with the analysis of leakage characteristics of the proportional directional valve. These characteristics distinguish a real directional valve from an ideal one. The ideal directional valve is characterized by zero leakage due to its perfect geometry. The investigated element is the three-position four-way proportional directional valve with zero spool lap and feedback from the spool position. The spool position is measured by the inductive position sensor and processed by external electronics. Internal leakage occurs due to axial and radial clearances between the spool and the sleeve. The magnitude of axial clearances that occur at throttle edges and their effect on the directional valve leakage is the subject of research. The blocked-line pressure sensitivity curve, the leakage flow curve and the center flow curve are determined by experiment. Individual characteristics are determined for different working fluid temperatures and different supply pressures. The flow through internal leaks in the center position of the valve spool is determined by analytical calculations. The flow through internal leaks is also simulated using the Ansys Fluent software. Subsequently, the geometry of the flow simulation model is modified to take into account manufacturing tolerances. From simulation results, the effect of the manufacturing tolerance magnitude on the internal leakage of the directional valve is evaluated. Finally, simulated dependencies are compared with experimentally determined characteristics.
引用
收藏
页数:13
相关论文
共 23 条
[1]   A Mathematical Model for Simulation of Flow Rate and Chamber Pressures in Spool Valves [J].
Afatsun, Ahmet C. ;
Balkan, R. Tuna .
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2019, 141 (02)
[2]   Optimization Algorithm and Joint Simulation to Micro Thermal Deformation Using Temperature Measurement in the Orifice of Hydraulic Valve [J].
Chen, Qianpeng ;
Ji, Hong ;
Zhao, Hongke ;
Zhao, Jing .
PROCESSES, 2020, 8 (09)
[3]   Coupling behavior between adhesive and abrasive wear mechanism of aero-hydraulic spool valves [J].
Chen Yunxia ;
Gong Wenjun ;
Kang Rui .
CHINESE JOURNAL OF AERONAUTICS, 2016, 29 (04) :1119-1131
[4]  
Eryilmaz B., 2000, ASME INT MECH ENG C, DOI DOI 10.1115/IMECE2000-2320
[5]   Physics-of-failure models of erosion wear in electrohydraulic servovalve, and erosion wear life prediction method [J].
Fang, Xin ;
Yao, Jinyong ;
Yin, Xizhong ;
Chen, Xun ;
Zhang, Chunhua .
MECHATRONICS, 2013, 23 (08) :1202-1214
[6]  
Fitch E.C., 1998, Hydraulic component design and selection
[7]  
Gordic D, 2011, ARCH CIV MECH ENG, V11, P859, DOI 10.1016/S1644-9665(12)60082-X
[8]   Effect of Oil Viscosity on Pulsating Flow in Pipe [J].
Hruzik, L. ;
Burecek, A. ;
Vasina, M. .
ADVANCES IN MECHANISM DESIGN II, 2017, 44 :137-143
[9]  
Ledvon Marian, 2022, MATEC Web of Conferences, DOI 10.1051/matecconf/202236902007
[10]   Modeling and Dynamic Analysis of Proportional Directional Valve [J].
Ledvon, Marian ;
Polasek, Tomas ;
Burecek, Adam ;
Hruzik, Lumir .
38TH MEETING OF DEPARTMENTS OF FLUID MECHANICS AND THERMODYNAMICS, 2019, 2118