Microstructure Evolution and Hardness Improvement of WC-Co Composites Sintered with Fe Substituting Part of Co Binder

被引：6

作者：

Li, Xun ^{[1
]}

Zhang, Junfei ^{[2
]}

Zhang, Qiang ^{[2
]}

Zhang, Xianwei ^{[2
]}

Ji, Vincent ^{[3
]}

Liu, Jinlong ^{[1
]}

机构：

[1] Northeastern Univ, Key Lab Anisotropy & Texture Mat, Minist Educ, Shenyang 110819, Peoples R China

[2] Liaoning Wuhuan Special Mat & Intelligent Equipmen, Shenyang 113122, Peoples R China

[3] Univ Paris Saclay, Inst Chim Mol & Mat Orsay, F-91405 Orsay, France

来源：

COATINGS | 2023年 / 13卷 / 01期

关键词：

WC-Co; Fe; eta phase; grain growth; hardness; toughness; NI-CO; GRAIN-GROWTH; METAL; BEHAVIOR; MECHANISM; NICKEL;

D O I：

10.3390/coatings13010116

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

WC-13Co (wt.%) composite with Fe added was prepared by pressureless sintering, and its microstructure and mechanical properties were analyzed by X-ray Diffraction (XRD), Scanning Electronic Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and Vickers hardness tester. The effect of Fe and C content on the microstructure of the eta phase, binder phase, grain size and porosity, as well as mechanical properties in the W-Co-Fe-C system, was discussed quantitatively. The position of added Fe in the lattice of the composites is clarified. When 2%-4% Fe was added, Fe existes in both the binder phase and the low-carbon eta phase. In the lattice of the eta phase, Fe occupies the position of Co and Fe uniformly existes in the binder with the structure of simple cubic when the composites is in the eutectic phase region. Differently from the previous report that the growth of WC in liquid Fe was severely limited, the size of WC in the W-Co-Fe-C system increases from 1.14 mu m to 1.21 mu m when the content of Fe increases from 0 to 4%, which indicates that the growth behavior of WC in liquid CoFe was different from that in liquid Fe, but closer to that in liquid Co. The sample added both 2% Fe and 1% C has the optimum matching of hardness and toughness. Compared with the hardness of 979 HV30 in the sample without adding Fe and C, the hardness of the sample with both 2% Fe and 1% C added achieved 1071 HV30, which is increased by 9.4% under the conditions of a slight increase in fracture toughness.

引用

页数：15

共 50 条

[41] Investigation on microstructure of electron beam welded WC-Co/40Cr joints [J].

Chen, Guoqing ;

Shu, Xi ;

Liu, Junpeng ;

Zhang, Bo ;

Zhang, Binggang ;

Feng, Jicai .

VACUUM, 2018, 149 :96-100

[42] Microstructure and bend strength of WC-Co and steel joints [J].

Wang, H ;

Yang, D ;

Zhao, X ;

Chen, C ;

Wang, Q .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2005, 10 (02) :167-168

[43] Microstructure features of large grains in WC-Co alloys [J].

Delanoe, A. ;

Lay, S. ;

Missiaen, J. M. .

PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 :1213-+

[44] Influence of specimen size and microstructure on uniaxial compression of WC-Co micropillars [J].

Sandoval, D. A. ;

Rinaldi, A. ;

Notargiacomo, A. ;

Ther, O. ;

Tarres, E. ;

Roa, J. J. ;

Llanes, L. .

CERAMICS INTERNATIONAL, 2019, 45 (13) :15934-15941

[45] Microstructure and wear resistance of WC-Co by three consolidation processing techniques [J].

Picas, J. A. ;

Xiong, Y. ;

Punset, M. ;

Ajdelsztajn, L. ;

Forn, A. ;

Schoenung, J. M. .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (02) :344-349

[46] MICROSTRUCTURE PARAMETERS VERSUS INDENTATION SIZE EFFECT IN WC-Co HARDMETALS [J].

Duszova, Annamaria ;

Hornak, Peter ;

Stoyka, Vladimir ;

Hvizdos, Pavol ;

Lofaj, Frantisek ;

Dusza, Jan .

CHEMICKE LISTY, 2011, 105 :S792-S793

[47] Effect of Co content on microstructure and mechanical properties of ultrafine grained WC-Co cemented carbide sintered by spark plasma sintering [J].

Liu, Kui ;

Wang, Zhenhua ;

Yin, Zengbin ;

Cao, Liyan ;

Yuan, Juntang .

CERAMICS INTERNATIONAL, 2018, 44 (15) :18711-18718

[48] Shape retention and infiltration height in complex WC-Co parts made via binder jet of WC with subsequent Co melt infiltration [J].

Cramer, Corson L. ;

Wieber, Natalie R. ;

Aguirre, Trevor G. ;

Lowden, Richard A. ;

Elliott, Amy M. .

ADDITIVE MANUFACTURING, 2019, 29

[49] The microstructure evolution of graphene in nanoindentation G/WC-Co based on molecular dynamics simulation [J].

Ding, Yezhang ;

Li, Duosheng ;

Xu, Feng ;

Lang, Wenchang ;

Qin, Qing H. ;

Ye, Zhiguo ;

Liu, Junhong ;

Wen, Xin .

[50] Enhancing the wear resistance of sintered WC-Co composite by adding pseudo-elastic TiNi constituent [J].

Pan, Y. ;

Li, D. Y. ;

Zhang, H. .

WEAR, 2011, 271 (9-10) :1916-1921

← 1 2 3 4 5 →