Large microwave absorption By Fe3O4@CuNW hybrid nanoparticles filled epoxy nanocomposites in the X-Band

被引:11
|
作者
Bheema, Rajesh Kumar [1 ]
Etika, Krishna C. [1 ]
机构
[1] BITS Pilani, Dept Chem Engn, Pilani Campus, Pilani, Rajasthan, India
关键词
Composite materials; Nanostructured materials; Chemical synthesis; INTERFERENCE SHIELDING EFFECTIVENESS; COPPER NANOWIRES; DIELECTRIC-PROPERTIES; FE3O4; NANOPARTICLES; POLYMER COMPOSITE; CONDUCTIVITY; PERFORMANCE; FABRICATION; REFLECTION; MECHANISMS;
D O I
10.1016/j.jallcom.2022.168405
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Microwave absorbing materials (MAM) are in great demand for various applications in both defense and commercial sectors. Polymer composites with tailorable properties have great potential for use as MAM owing to their low density, ease of processing, and low cost. In this work, the microwave absorption by epoxy composites containing, Fe3O4 nanoparticles deposited on the copper nanowires (i.e., Fe3O4@CuNW hybrid), copper nanowires (CuNW), and/or Fe3O4 nanoparticles were investigated for the first time. A set of epoxy composites with different filler loadings were prepared using a solvent-free resin blending method and were characterized for their morphological, surface composition, electrical, dielectric, magnetic, and microwave absorbing properties. The electrical conductivity values of the samples were measured, and the non-hybrid composites demonstrated percolated behavior, whereas hybrid samples exhibited non -perco-lated behavior. The non-hybrid composite containing 12 wt. % CuNW and 8 wt. % Fe3O4 exhibited the highest electrical conductivity value of 9.8 x 10-5 s/m compared to all other composites. The dielectric and magnetic losses obtained in the hybrid composites are higher than in non-hybrid composites. Furthermore, the hybrid composites containing 12 wt. % CuNW and 8 wt. % Fe3O4 exhibited the highest dielectric loss of 0.9 and magnetic loss of 1.4 as compared to other composites. The hybrid epoxy composites exhibited significantly large absorption with minimal reflections of microwaves as compared to non-hybrid compo-sites containing equal loadings of CuNW or Fe3O4. The hybrid composites containing 12 wt. % CuNW and 2 wt. % Fe3O4 exhibited low reflection power of 26 % and high absorption power of 64 % of the incident microwave as compared to all other composites. The one-millimeter thick hybrid composite filled with 12:8 (wt. %/wt. %) CuNW: Fe3O4 sample demonstrated EMI shielding effectiveness of 19.3 dB and absorbed 60 % of the microwave power over the X-band frequency range of 8-12.4 GHz.(c) 2022 Published by Elsevier B.V.
引用
收藏
页数:9
相关论文
共 50 条
  • [1] Electrical properties of epoxy nanocomposites containing Fe3O4 nanoparticles and Fe3O4 nanoparticles deposited on the surface of electrochemically exfoliated and oxidized graphite
    Radon, Adrian
    Wlodarczyk, Patryk
    Drygala, Aleksandra
    Lukowiec, Dariusz
    APPLIED SURFACE SCIENCE, 2019, 474 : 66 - 77
  • [2] BST@Copper Nanowire/Epoxy composites with excellent microwave absorption in the X-band
    Bheema, Rajesh Kumar
    Gopu, J.
    Kumar, A. V. Praveen
    Etika, Krishna C.
    CHEMICAL ENGINEERING JOURNAL, 2024, 496
  • [3] Microwave absorption behaviour of MWCNT based nanocomposites in X-band region
    Bhattacharya, P.
    Sahoo, S.
    Das, C. K.
    EXPRESS POLYMER LETTERS, 2013, 7 (03): : 212 - 223
  • [4] Light weight RGO/Fe3O4 nanocomposite for efficient electromagnetic absorption coating in X-band
    Mohammad, F. Z.
    Ahmad, Ijaz
    Siddiqui, J. J.
    Ali, K. M.
    Mudsar, M.
    Arshad, H.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2018, 29 (23) : 19775 - 19782
  • [5] Fabrication, characterization and X-band microwave absorption properties of PAni/Fe3O4/PVA nanofiber composites materials
    Takai, Zakiyyu Ibrahim
    Mustafa, Mohd Kamarulzaki
    Sekak, Khairunnadim Ahmad
    AbdulKadir, H. K.
    Asman, Saliza
    Idris, Aisha
    Mohammad, J.
    ARABIAN JOURNAL OF CHEMISTRY, 2020, 13 (11) : 7978 - 7989
  • [6] The influence of Fe3O4@GNP hybrids on enhancing the EMI shielding effectiveness of epoxy composites in the X-band
    Bhaskaran, Krithika
    Bheema, Rajesh Kumar
    Etika, Krishna C.
    SYNTHETIC METALS, 2020, 265
  • [7] Graphene/Magnetite (Fe3O4) Hybrid Fillers for Thermoplastic Composites: X-Band Electromagnetic Interference Shielding Characteristics
    Joseph, Jomy
    Sharma, Abhishek
    Sahoo, Baidehish
    Sidpara, Ajay M.
    Paul, Jinu
    JOURNAL OF ELECTRONIC MATERIALS, 2020, 49 (12) : 7259 - 7271
  • [8] Chemoselectivity-induced multiple interfaces in MWCNT/Fe3O4@ZnO heterotrimers for whole X-band microwave absorption
    Wang, Zhijiang
    Wu, Lina
    Zhou, Jigang
    Jiang, Zhaohua
    Shen, Baozhong
    NANOSCALE, 2014, 6 (21) : 12298 - 12302
  • [9] Enhanced microwave absorption property of epoxy nanocomposites based on PANI@Fe3O4@CNFs nanoparticles with three- phase heterostructure
    Yang, Lingfeng
    Cai, Haopeng
    Zhang, Bin
    Huo, Siqi
    Chen, Xi
    MATERIALS RESEARCH EXPRESS, 2018, 5 (02):
  • [10] Easily Dispersible NiFe2O4/RGO Composite for Microwave Absorption Properties in the X-Band
    Bateer, Buhe
    Zhang, Jianjao
    Zhang, Hongchen
    Zhang, Xiaochen
    Wang, Chunyan
    Qi, Haiqun
    JOURNAL OF ELECTRONIC MATERIALS, 2018, 47 (01) : 292 - 298