Effects of key parameters on water film properties and temperature field distribution inside transpiring wall reactor

Transpiring wall reactor (TWR) can efficiently weaken corrosion and salt deposition problems during super-critical water oxidation. Its corrosion and salt deposition resistance are mainly affected by water film properties and temperature field distribution. Therefore, the effects of crucial parameters on water film properties and temperature field distribution are investigated via numerical simulation in this work. The results indicate that the upper supercritical oxidation zone is mainly affected by the second layer of transpiration water instead of the third layer. The second, third layer optimal injection locations are at 0.036 m, 0.060 m in this study, respectively. Excessively thick transpiring wall decreases water film coverage rate thereby damaging TWR, conversely makes supercritical zone shrink and thus weakening degradation ability. Annular gap primarily affects the temperature distribution near the transpiring wall. Under the conditions of the work, transpiring wall thickness of 0.002 m and annular gap of 0.004 m are recommended.