Characterization of Chemical Components and Optical Properties of Toluene Secondary Organic Aerosol in Presence of Ferric Chloride Fine Particles

Iron ion is the common transition metal ion in atmospheric aerosol, which can affect the components and optics of secondary organic aerosol (SOA). In the current study, the atmospheric photooxidation of toluene to produce SOA in the presence of ferric chloride fine particles is simulated in a smog chamber; on-line and off-line mass spectrometry and spectroscopic instruments are used to characterize constituents and optics of SOA. Compare with SOA formed in the absence of fine particles, the laser desorption/ionization mass spectra of toluene SOA generated in the presence of ferric chloride fine particles show ion peaks of m/z = 163 and 178, the UV-Vis spectra of the extracting solution for toluene SOA have peaks near 400 and 700 nm, and the electrospray ionization mass spectra contain peaks at m/z = 248 and 300. Based on this spectral information, it is shown that gaseous methylcatechol formed from photooxidation of toluene may react with iron ion on the surface of fine particles by complexing and oxidation-reduction, resulting in methylbenzoquinone products and metallo-organic complex ions such as [Fe(III)(CH3C6H3OO)](+), [Fe(III)(CH3C6H3 OO)(2)](-) and [Fe(III)(CH3C6H3OO)Cl-2](-). These products have strong light absorption ability, resulting in an increase in the averaged mass absorption coefficient (< MAC >) in the 200 similar to 1000 nm range and the MAC at 365 nm (MAC(365)) for toluene SOA, while < MAC > and MAC(365) progressively increase with an increasing concentration of ferric chloride fine particles. These results serve as experimental references for the study of the formation mechanism and optical properties of metallo-organic complexes in atmospheric aerosol particles in regions experiencing high levels of fine particles of metal and automobile exhaust pollution.