The modeling and analysis for the natural frequency adjustments of Vehicle Manipulator for the ITER Blanket Remote Handling System

被引：0
作者：
Tomoyuki, Ito [1 ,2 ]
Yuto, Noguchi [1 ]
Nobukazu, Takeda [1 ]
Masaki, Takahashi [2 ]
机构：
[1] Natl Inst Quantum Sci & Technol, Remote Handling Equipment, 801-1 Mukouyama, Naka, Ibaraki 3110193, Japan
[2] Keio Univ, 3-14-1 Hiyoshi Kohoku Ku, Yokohama, Kanagawa 2230061, Japan
来源：
FUSION ENGINEERING AND DESIGN | 2023年 / 192卷
关键词：
ITER; Natural frequency; Resonance avoidance; Remote handling;
D O I：
10.1016/j.fusengdes.2023.113802
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
This paper describes a method to adjust the natural frequency of the Vehicle Manipulator of the ITER Blanket Remote Handling System (BRHS). The natural frequency was adjusted to avoid the seismic resonance by using the redundancy of degree of freedom of the Vehicle Manipulator. The Vehicle Manipulator was modeled and analyzed with lumped mass model with joint stiffness. The analysis has shown that the natural frequencies of the Vehicle Manipulator can be changed from 0.5 Hz to 12 Hz in the gripping posture of the First Wall in the vacuum vessel, suggesting that the dominant seismic frequency around 7Hz-9 Hz can be avoided.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Analysis of ITER upper port plug remote handling maintenance scenarios
    Koning, J. F.
    de Baar, M. R.
    Elzendoorn, B. S. Q.
    Heernskerk, C. J. M.
    Ronden, D. M. S.
    Schuth, W. J.
    FUSION ENGINEERING AND DESIGN, 2012, 87 (5-6) : 515 - 519
  • [42] Development of a prototype work-cell for validation of ITER remote handling control system standards
    Rastogi, Naveen
    Krishna, Vamshi
    Dutta, Pramit
    Stephen, Manoah
    Gotewal, Krishan Kumar
    Hamilton, David
    Mukherjee, J. K.
    FUSION ENGINEERING AND DESIGN, 2017, 124 : 677 - 681
  • [43] Generic control system design for the Cassette Multifunctional Mover and other ITER remote handling equipment
    Irving, A
    Palmer, J
    Siuko, M
    FUSION ENGINEERING AND DESIGN, 2005, 75-79 : 553 - 557
  • [44] Theoretical Calculation and Kinematics Analysis of Double Seal Door for ITER Remote Handling Transfer Cask System
    Shijun Qin
    Yuntao Song
    Damao Yao
    Ge Li
    Journal of Fusion Energy, 2014, 33 : 435 - 443
  • [45] Theoretical Calculation and Kinematics Analysis of Double Seal Door for ITER Remote Handling Transfer Cask System
    Qin, Shijun
    Song, Yuntao
    Yao, Damao
    Li, Ge
    JOURNAL OF FUSION ENERGY, 2014, 33 (04) : 435 - 443
  • [46] Analysis of the steady state hydraulic behaviour of the ITER blanket cooling system
    Di Maio, P. A.
    Dell'Orco, G.
    Furmanek, A.
    Garitta, S.
    Merola, M.
    Mitteau, R.
    Raffray, R.
    Spagnuolo, G. A.
    Vallone, E.
    FUSION ENGINEERING AND DESIGN, 2015, 98-99 : 1470 - 1473
  • [47] Guidelines for remote handling maintenance of ITER neutral beam line components: Proposal of an alternate supporting system
    Cordier, J. J.
    Bayetti, P.
    Hemsworth, R.
    David, O.
    Friconneau, J. P.
    FUSION ENGINEERING AND DESIGN, 2007, 82 (15-24) : 2015 - 2020
  • [48] The Structural Design and Analysis of Pallet in ITER Transfer Cask for Remote Handling Operations
    周自波
    姚达毛
    曹磊
    李格
    Plasma Science and Technology, 2009, (03) : 352 - 358
  • [49] The Structural Design and Analysis of Pallet in ITER Transfer Cask for Remote Handling Operations
    Zhou Zibo
    Yao Damao
    Cao Lei
    Li Ge
    PLASMA SCIENCE & TECHNOLOGY, 2009, 11 (03) : 352 - 358
  • [50] Concept for a vertical maintenance remote handling system for multi module blanket segments in DEMO
    Coleman, M.
    Sykes, N.
    Cooper, D.
    Iglesias, D.
    Bastow, R.
    Loving, A.
    Harman, J.
    FUSION ENGINEERING AND DESIGN, 2014, 89 (9-10) : 2347 - 2351
12345