The modeling and analysis for the natural frequency adjustments of Vehicle Manipulator for the ITER Blanket Remote Handling System

被引：0
作者：
Tomoyuki, Ito [1 ,2 ]
Yuto, Noguchi [1 ]
Nobukazu, Takeda [1 ]
Masaki, Takahashi [2 ]
机构：
[1] Natl Inst Quantum Sci & Technol, Remote Handling Equipment, 801-1 Mukouyama, Naka, Ibaraki 3110193, Japan
[2] Keio Univ, 3-14-1 Hiyoshi Kohoku Ku, Yokohama, Kanagawa 2230061, Japan
来源：
FUSION ENGINEERING AND DESIGN | 2023年 / 192卷
关键词：
ITER; Natural frequency; Resonance avoidance; Remote handling;
D O I：
10.1016/j.fusengdes.2023.113802
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
This paper describes a method to adjust the natural frequency of the Vehicle Manipulator of the ITER Blanket Remote Handling System (BRHS). The natural frequency was adjusted to avoid the seismic resonance by using the redundancy of degree of freedom of the Vehicle Manipulator. The Vehicle Manipulator was modeled and analyzed with lumped mass model with joint stiffness. The analysis has shown that the natural frequencies of the Vehicle Manipulator can be changed from 0.5 Hz to 12 Hz in the gripping posture of the First Wall in the vacuum vessel, suggesting that the dominant seismic frequency around 7Hz-9 Hz can be avoided.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Availability improvement of ITER blanket remote handling system
    Maruyama, Takahito
    Mikami, Hidenori
    Noguchi, Yuto
    Saito, Makiko
    Takeda, Nobukazu
    FUSION ENGINEERING AND DESIGN, 2018, 136 : 390 - 393
  • [2] Rescue tool for ITER blanket remote handling system
    Maruyama, Takahito
    Ogawa, Shota
    Takeda, Nobukazu
    FUSION ENGINEERING AND DESIGN, 2019, 146 : 2498 - 2503
  • [3] Impact hammer test of ITER blanket remote handling system
    Noguchi, Yuto
    Maruyama, Takahito
    Ueno, Kenichi
    Komai, Masafumi
    Takeda, Nobukazu
    Kakudate, Satoshi
    FUSION ENGINEERING AND DESIGN, 2016, 109 : 1291 - 1295
  • [4] Design progress of ITER blanket remote handling system towards manufacturing
    Noguchi, Y.
    Saito, M.
    Maruyama, T.
    Takeda, N.
    FUSION ENGINEERING AND DESIGN, 2018, 136 : 722 - 728
  • [5] Development of a virtual reality simulator for the ITER blanket remote handling system
    Takeda, Nobukazu
    Kakudate, Satoshi
    Nakahira, Masataka
    Shibanuma, Kiyoshi
    Tesini, Alessandro
    FUSION ENGINEERING AND DESIGN, 2008, 83 (10-12) : 1837 - 1840
  • [6] Design progress of the ITER blanket remote handling equipment
    Nakahira, Masataka
    Matsumoto, Yasuhiro
    Kakudate, Satoshi
    Takeda, Nobukazu
    Shibanuma, Kiyoshi
    Tesini, Alessandro
    FUSION ENGINEERING AND DESIGN, 2009, 84 (7-11) : 1394 - 1398
  • [7] Irradiation Tests of the Sleeve for the Telescopic Arm of the ITER Blanket Remote Handling System
    SAITO M.
    KAWAI Y.
    TAKEDA N.
    Plasma and Fusion Research, 2024, 19
  • [8] Irradiation Tests of the Sleeve for the Telescopic Arm of the ITER Blanket Remote Handling System
    Saito, Makiko
    Kawai, Yusuke
    Takeda, Nobukazu
    PLASMA AND FUSION RESEARCH, 2024, 19
  • [9] Progress of R&D and design of blanket remote handling equipment for ITER
    Kakudate, S.
    Takeda, N.
    Nakahira, M.
    Matsumoto, Y.
    Shibamuma, K.
    Tesini, A.
    FUSION ENGINEERING AND DESIGN, 2008, 83 (10-12) : 1850 - 1855
  • [10] Mock-up test on key components of ITER blanket remote handling system
    Takeda, Nobukazu
    Kakudate, Satoshi
    Nakahira, Masataka
    Matsumoto, Yasuhiro
    Taguchi, Koh
    Kozaka, Hiroshi
    Shibanuma, Kiyoshi
    Tesini, Alessandro
    FUSION ENGINEERING AND DESIGN, 2009, 84 (7-11) : 1813 - 1817
12345