Performance and Modification Mechanism of Recycled Glass Fiber of Wind Turbine Blades and SBS Composite-Modified Asphalt

被引:8
|
作者
Nie, Yihua [1 ]
Liu, Qing [1 ]
Xiang, Zhiheng [1 ]
Zhong, Shixiong [1 ]
Huang, Xinyao [1 ]
机构
[1] Hunan Univ Sci & Technol, Sch Civil Engn, Xiangtan 411201, Peoples R China
来源
APPLIED SCIENCES-BASEL | 2023年 / 13卷 / 10期
关键词
composite-modified asphalt; recycled glass fiber; wind turbine blades; silane coupling agent; SBS-modified asphalt; REUSE ASSESSMENT; CONCRETE; STRENGTH; WASTES;
D O I
10.3390/app13106335
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Efficient disposal of composite materials recycled from wind turbine blades (WTB) at end-of-life needs to be solved urgently. To investigate the modification effects and mechanism on SBS-modified asphalt of the recycled glass fiber (GF) from WTB, GF-WTB/SBS composite-modified asphalt was prepared. Dynamic shear rheometer (DSR) and bending beam rheometer (BBR) were adopted to evaluate its performance. FTIR, SEM, EDS, and AFM methods were used to assess coupling agent pretreatment effects on GF-WTB and observe the modification mechanism. The macroscopic tests show that reasonable addition of GF-WTB effectively raises the high-temperature performance and low-temperature crack resistance evaluation index k-value of SBS-modified asphalt, and the optimal content is 2 wt% GF-WTB with 4 wt% SBS. FTIR, SEM, and EDS tests show GF-WTB can be successfully grafted by UP152 coupling agent and show that adhesion of the GF-WTB to the SBS-modified asphalt can be improved. AFM observation shows SBS and GF-WTB have good compatibility, improving the asphalt elasticity and toughness. This study provides a feasible solution for environmentally friendly regeneration of the composite materials from WTB and contributes to the development of the secondary modifier of SBS-modified asphalt.
引用
收藏
页数:18
相关论文
共 50 条
  • [31] Preparation and performance of oxidized crumb rubber (OCR)/nano-SiO2 composite-modified asphalt
    Liu, Yumei
    Zheng, Mulian
    Zhu, Yueming
    Zhu, Linlin
    Li, Hongyin
    Liu, Peng
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 279
  • [32] Fabrication and Performance Evaluation of High-Performance SBS-Modified Asphalt through Secondary Modification with Aminated Graphene Oxide
    Yang, Song
    Zhu, Hongzhou
    Yang, Xiaosi
    Tan, Qiqi
    Chen, Yuanyuan
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2024, 36 (12)
  • [33] Preparation of double-layer film modified polyacrylonitrile fiber modifier for designing and performance evaluation of PAN/SBS composite asphalt
    Ren, Denghui
    Liu, Yu
    Muhammad, Yaseen
    Li, Xinyu
    Mao, Canyun
    Zhao, Zhenxia
    Pei, Ruinan
    Li, Jing
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 350
  • [34] Effect of blending protocol on the performance of SBS/sulfur/soybean-derived additive composite modified hard asphalt
    Chen, Conglin
    Williams, R. Christopher
    Podolsky, Joseph H.
    Hohmann, Austin D.
    Cochran, Eric W.
    INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 2021, 22 (12) : 1504 - 1517
  • [35] Relationship Between Structural Design and Performance of Sandwich Composite Materials for Wind Turbine Blades
    Yang, Senlin
    Jia, Dezhuang
    Li, Lei
    Chen, Zhengyuan
    Xu, Jiazhuang
    Zhong, Ganji
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2024, 40 (11): : 119 - 126
  • [36] Investigation of rheological properties and modification mechanism of SBS-modified asphalt with different warm mix additives
    Li, Kenan
    Yan, Xili
    Wang, Yujie
    Pu, Jiheng
    Liu, Wanchun
    Jiang, Shuangquan
    INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 2024, 25 (01)
  • [37] Cross-section analysis of wind turbine blades: comparison of failure between glass and carbon fiber
    Balokas, Georgios
    Theotokoglou, Efstathios E.
    ADVANCED COMPOSITE MATERIALS, 2018, 27 (06) : 561 - 574
  • [38] Collaborative disposal of exhaust gas and waste wind turbine blades: Mechanical properties of recycled glass fibres and economic analysis
    Li, Liangyu
    Wang, Yibin
    Wang, Min
    Tan, Houzhang
    Xiong, Xiaohe
    JOURNAL OF CLEANER PRODUCTION, 2024, 471
  • [39] Recycled Glass Fiber Composites from Wind Turbine Waste for 3D Printing Feedstock: Effects of Fiber Content and Interface on Mechanical Performance
    Rahimizadeh, Amirmohammad
    Kalman, Jordan
    Henri, Rodolphe
    Fayazbakhsh, Kazem
    Lessard, Larry
    MATERIALS, 2019, 12 (23)
  • [40] Performance Evaluation and Modification Mechanism Analysis of High-Viscosity Modified Asphalt
    Zhang, Rui
    Zhang, Yubin
    Yang, Qun
    JOURNAL OF TESTING AND EVALUATION, 2024,