First acceptance testing of multiple A10 absolute gravimeters in China and analysis of the comparison results

Three A10 absolute gravimeters (AGs) were first acquired in China by the Hubei Earthquake Agency under the Belt and Road Seismic Monitoring Network Project. Although AG measuring and testing technique is not new, the purchase and simultaneous testing of 3 A10 absolute gravimeters is unprec-edented in China. This study conducted the first acceptance testing of the AGs at 3 locations (the Jiu-fengshan Gravity Observation Station, the Global Navigation Satellite System Observation Station in Wuhan, and the Jiugongshan Observation Station in Xianning). The results were compared using a method based on expert validation, and the acceptance testing scheme was formulated by referring to the Technical Regulations for Tectonic Environment Monitoring Networks in China and Specifications for Gravimetry Control. Based on the repeatability, precision, and consistency of the measured g values, the results from each instrument were evaluated using the air pressure precision test. Comparing the in-strument reference values, the final test results can identify the indicator parameters for 3 A10 AGs, the effects of the surrounding environment, and the related parameters on measurement precision. The precision of A10-059, A10-058, and A10-057 exceeded 0.78 mGal, 0.79 mGal, and 0.42 mGal, respectively. This testing scheme can be used as a reference for conducting acceptance testing of AGs in the future and obtaining absolute gravimetric measurements.& COPY; 2023 Editorial office of Geodesy and Geodynamics. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license (http:// creativecommons.org/licenses/by-nc-nd/4.0/).