An improved 2D arc-star-shaped structure with negative Poisson's ratio: In-plane analysis

被引:8
作者
Sindelic, Vladimir [1 ]
Nikolic, Aleksandar [1 ]
Minak, Giangiacomo [2 ]
Bogojevic, Nebojsa [1 ]
Kostic, Snezana Ciric [1 ]
机构
[1] Univ Kragujevac, Fac Mech & Civil Engn Kraljevo, Kraljevo, Serbia
[2] Univ Bologna, Dept Ind Engn DIN, Alma Mater Studiorum, Bologna, Italy
来源
MATERIALS TODAY COMMUNICATIONS | 2023年 / 37卷
关键词
Arc-star-shaped structure; Negative Poisson's ratio; Auxetic; Metamaterials; Selective laser sintering; Optical measurement technique; HONEYCOMB;
D O I
10.1016/j.mtcomm.2023.107593
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper proposes an improved 2D arc-star-shaped structure with a negative Poisson's ratio, whereas the analytical and finite element analyses were performed. Furthermore, the model of the improved 2D arc-star-shaped structure was produced by using selective laser sintering additive technology and scanned after that by using the optical measurement technique on the ATOS COMPACT SCAN 5 M scanner to obtain experimental measurements. It has been observed that for the same geometric parameters, a higher value of the negative Poisson's ratio is obtained compared to the initial 2D arc-star structure with the most often lower value of relative density, which directly leads to lower consumption of the material.
引用
收藏
页数:12
相关论文
共 37 条
  • [1] An analytical model for star-shaped re-entrant lattice structures with the orthotropic symmetry and negative Poisson's ratios
    Ai, L.
    Gao, X-L
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018, 145 : 158 - 170
  • [2] AUXETIC POLYETHYLENE - THE EFFECT OF A NEGATIVE POISSON RATIO ON HARDNESS
    ALDERSON, KL
    PICKLES, AP
    NEALE, PJ
    EVANS, KE
    [J]. ACTA METALLURGICA ET MATERIALIA, 1994, 42 (07): : 2261 - 2266
  • [3] Effective Young's modulus of Bézier-based honeycombs: Semi-analytical modeling and the role of design parameters and curvature
    Alvarez-Trejo, Alberto
    Cuan-Urquizo, Enrique
    Roman-Flores, Armando
    [J]. THIN-WALLED STRUCTURES, 2023, 192
  • [4] In-plane elasticity of a strengthened re-entrant honeycomb cell
    Baran, Tarik
    Ozturk, Mitat
    [J]. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2020, 83
  • [5] In-plane elasticity of the re-entrant auxetic hexagonal honeycomb with hollow-circle joint
    Chen, Yu
    Wang, Zhi-Wei
    [J]. AEROSPACE SCIENCE AND TECHNOLOGY, 2022, 123
  • [6] Experimental and numerical studies on the compressive mechanical properties of the metallic auxetic reentrant honeycomb
    Dong, Zhichao
    Li, Ying
    Zhao, Tian
    Wu, Wenwang
    Xiao, Dengbao
    Liang, Jun
    [J]. MATERIALS & DESIGN, 2019, 182
  • [7] Gibson L. J., 1997, CELLULAR SOLIDS STRU, DOI [10.1017/CBO9781139878326, DOI 10.1017/CBO9781139878326]
  • [8] Deformation behaviors and energy absorption of auxetic lattice cylindrical structures under axial crushing load
    Guo, Yongguang
    Zhang, Jian
    Chen, Liming
    Du, Bing
    Liu, Houchang
    Chen, Liliang
    Li, Weiguo
    Liu, Yizhi
    [J]. AEROSPACE SCIENCE AND TECHNOLOGY, 2020, 98
  • [9] In-plane elastic constants of a new curved cell walls honeycomb concept
    Harkati, A.
    Boutagouga, D.
    Harkati, E.
    Bezazi, A.
    Scarpa, F.
    Ouisse, M.
    [J]. THIN-WALLED STRUCTURES, 2020, 149
  • [10] In-plane elasticity of a multi re-entrant auxetic honeycomb
    Harkati, E.
    Daoudi, N.
    Bezazi, A.
    Haddad, A.
    Scarpa, F.
    [J]. COMPOSITE STRUCTURES, 2017, 180 : 130 - 139