Perspectives on medical 3D printing at the point-of-care from the new European 3D Printing Special Interest Group

被引：6

作者：

Biglino, Giovanni ^{[1
,2
]}

Hopfner, Carina ^{[3
]}

Lindhardt, Joakim ^{[4
]}

Moscato, Francesco ^{[5
,6
,7
]}

Munuera, Josep ^{[8
,9
]}

Oberoi, Gunpreet ^{[5
,10
]}

Tel, Alessandro ^{[11
]}

Esteve, Arnau Valls ^{[8
,12
,13
]}

机构：

[1] Univ Bristol, Bristol Royal Infirm, Bristol Med Sch, Upper Maudlin St, Bristol BS2 8HW, England

[2] Imperial Coll London, Natl Heart & Lung Inst, London, England

[3] LMU Klinikum, Dept Pediat Cardiol & Pediat Intens Care Med, Munich, Germany

[4] Aarhus Univ Hosp, 3D Printing Ctr, Aarhus, Denmark

[5] Med Univ Vienna, Ctr Med Phys & Biomed Engn, Vienna, Austria

[6] Ludwig Boltzmann Inst Cardiovasc Res, Vienna, Austria

[7] Austrian Cluster Tissue Regenerat, Vienna, Austria

[8] Univ Barcelona, Hosp St Joan de Deu, Unit 3D4H 3D, Barcelona, Spain

[9] Univ Barcelona, Hosp St Joan de Deu, Dept Diagnost Imaging, Barcelona, Spain

[10] ACMIT Gmbh, Austrian Ctr Med Innovat & Technol Vienna, Wiener Neustadt, Austria

[11] Univ Hosp Udine, Head & Neck & Neurosci Dept, Clin Maxillofacial Surg, Udine, Italy

[12] Inst Recerca St Joan de Deu, Innovat Hlth Technol, Esplugas de Llobregat, Spain

[13] Univ Barcelona, Dept Med & Recerca Translac, Fac Med & Ciencies Salut, Barcelona, Spain

来源：

3D PRINTING IN MEDICINE | 2023年 / 9卷 / 01期

关键词：

D O I：

10.1186/s41205-022-00167-3

中图分类号：

R8 [特种医学]; R445 [影像诊断学];

学科分类号：

1002 ; 100207 ; 1009 ;

摘要：

This editorial presents the vision for the newly formed (2022) European 3D Special Interest Group (EU3DSIG) in the landscape of medical 3D printing. There are four areas of work identified by the EU3DSIG in the current landscape, namely: 1) creating and fostering communication channels among researches, clinicians and industry, 2) generating awareness of hospitals point-of-care 3D technologies; 3) knowledge sharing and education; 4) regulation, registry and reimbursement models.

引用

页数：4

共 12 条

[1] Expanding Quality by Design Principles to Support 3D Printed Medical Device Development Following the Renewed Regulatory Framework in Europe [J].

Adalbert, Livia ;

Kanti, S. P. Yamini ;

Jojart-Laczkovich, Orsolya ;

Akel, Hussein ;

Csoka, Ildiko .

BIOMEDICINES, 2022, 10 (11)

[2] Role of 3D printing technology in paediatric teaching and training: a systematic review [J].

Asif, Ashar ;

Lee, Elgin ;

Caputo, Massimo ;

Biglino, Giovanni ;

Shearn, Andrew Ian Underwood .

BMJ PAEDIATRICS OPEN, 2021, 5 (01)

[3]

Assante D, 2020, IEEE GLOB ENG EDUC C, P1133, DOI [10.1109/EDUCON45650.2020.9125311, 10.1109/educon45650.2020.9125311]

[4]

Dalgarno K., 2019, 3D PRINTING MED DEVI

[5] Invited review article: Where and how 3D printing is used in teaching and education [J].

Ford, Simon ;

Minshall, Tim .

ADDITIVE MANUFACTURING, 2019, 25 :131-150

[6] Hybrid design and prototyping of metamaterials and metasurfaces [J].

Franco-Martinez, Francisco ;

Grasl, Christian ;

Kornfellner, Erik ;

Vostatek, Matthias ;

Cendrero, Adrian Martinez ;

Moscato, Francesco ;

Lantada, Andres Diaz .

VIRTUAL AND PHYSICAL PROTOTYPING, 2022, 17 (04) :1031-1046

[7]

Grab M., 2022, FRONT CARDIOVASC MED, V70, pDGTHG, DOI [10.1055/s-0042-1742904, DOI 10.1055/S-0042-1742904]

[8] FRESH 3D Bioprinting a Full-Size Model of the Human Heart [J].

Mirdamadi, Eman ;

Tashman, Joshua W. ;

Shiwarski, Daniel J. ;

Palchesko, Rachelle N. ;

Feinberg, Adam W. .

ACS BIOMATERIALS SCIENCE & ENGINEERING, 2020, 6 (11) :6453-6459

[9]

RegDesk, 2020, MHRA GUID 3D PRINT M

[10] The impact of regulation, reimbursement, and research on the value of 3D printing and other 3D procedures in medicine [J].

Rybicki, Frank J. .

3D PRINTING IN MEDICINE, 2022, 8 (01)

← 1 2 →