Ultimate tensile capacity of hot-dip galvanized ultra-high-strength steel cut edges and welded joints

被引：1
|
作者：
Lipiainen, Kalle [1 ]
Ahola, Antti [1 ]
Javaheri, Vahid [2 ]
Bjork, Timo [1 ]
机构：
[1] Lappeenranta Lahti Univ Technol LUT, Lab Steel Struct, POB 20, Lappeenranta 53851, Finland
[2] Univ Oulu, Ctr Adv Steels Res, Mat & Mech Engn, Oulu, Finland
来源：
WELDING IN THE WORLD | 2023年 / 67卷 / 12期
关键词：
Tensile strength; Hot-dip galvanizing; Ultra-high-strength steel; Cut edge; Welded joint;
D O I：
10.1007/s40194-023-01611-6
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Tensile tests of 6-mm-thick hot-dip galvanized (HDG) S960 specimens were performed. The study focused on room temperature but also - 40 degrees C cold temperature tests were performed to ensure material behavior and reliability. Microstructural characterization using a scanning electron microscopy was performed to evaluate the influence of HDG. The results showed that HDG slightly decreased the tensile strength of plain S960 specimens whereas its effect on welded joints was not significant in both room and cold temperatures.
引用
收藏
页码：2779 / 2789
页数：11
相关论文
共 50 条
  • [21] Evaluation of geometrical notch and quality effects in the fatigue strength assessment of ultra-high-strength steel cut edges
    Lipiainen, Kalle
    Afkhami, Shahriar
    Ahola, Antti
    Bjork, Timo
    STRUCTURES, 2022, 37 : 881 - 892
  • [22] Capacity of Fillet Welded Joints Made of Ultra High-Strength Steel
    Timo Björk
    Joe Toivonen
    Timo Nykänen
    Welding in the World, 2012, 56 : 71 - 84
  • [23] CAPACITY OF FILLET WELDED JOINTS MADE OF ULTRA HIGH-STRENGTH STEEL
    Bjork, T.
    Toivonen, J.
    Nykanen, T.
    WELDING IN THE WORLD, 2012, 56 (3-4) : 71 - 84
  • [24] High strength hot-dip galvanized steel grades: A critical comparison of alloy design, line configuration and properties
    Pichler, A.
    Traint, S.
    Arnolder, G.
    Stiaszny, P.
    Blaimschein, M.
    Werner, E.A.
    Ironmaking and Steelmaking, 2003, 30 (06): : 21 - 31
  • [25] Corrosion Behavior of Hot-dip Galvanized Advanced High Strength Steel Sheet in a Simulated Marine Atmospheric Environment
    Zhang, Kai
    Song, Renbo
    Gao, Yi
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2019, 14 (02): : 1488 - 1499
  • [26] Vanadium microalloying for ultra-high strength steel sheet treated by hot-dip metallising
    Hutchinson, B.
    Martin, D.
    Karlsson, O.
    Lindberg, F.
    Thoors, H.
    Marceau, R. K. W.
    Taylor, A. S.
    MATERIALS SCIENCE AND TECHNOLOGY, 2017, 33 (04) : 497 - 506
  • [27] Ultra high strength steels hot rolled and cold rolled hot dip galvanized
    Suárez, R
    Bonet, JS
    Gálvez, JA
    Barrón, V
    Pérez, E
    43RD MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS, 2001, 39 : 435 - 448
  • [28] Press formability of newly developed high lubricity hot-dip galvanized steel sheets
    Furuya, S.
    Hoshino, K.
    Ogihara, Y.
    Yamasaki, Y.
    Taira, S.
    38TH INTERNATIONAL DEEP DRAWING RESEARCH GROUP ANNUAL CONFERENCE (IDDRG 2019), 2019, 651
  • [29] Microstructure and mechanical property in a high strength high-Al-low-Si hot-dip galvanized dual phase steel
    Deng, Yonggang
    Di, Hongshuang
    Hu, Meiyuan
    Zhang, Jiecen
    Misra, R. D. K.
    METALLURGICAL RESEARCH & TECHNOLOGY, 2017, 114 (02)
  • [30] Effect of confinement on bond strength of hot-dip galvanized lap splices in high-strength concrete
    Hamad, BS
    Fakhran, MF
    ACI STRUCTURAL JOURNAL, 2006, 103 (01) : 48 - 56
12345