Design and Mass Optimization of Numerical Models for Composite Wind Turbine Blades

被引：4
|
作者：
Zhang, Zhiqiang [1 ,2 ]
Zhang, Chunyan [1 ]
Qiao, Yinhu [1 ]
Zhou, Yudie [1 ]
Wang, Shuaishuai [2 ]
机构：
[1] Anhui Sci & Technol Univ, Sch Mech Engn, Fengyang 233100, Peoples R China
[2] Anhui Polytech Univ, Sch Mech Engn, Wuhu 241000, Peoples R China
来源：
JOURNAL OF MARINE SCIENCE AND ENGINEERING | 2023年 / 11卷 / 01期
关键词：
shape optimization; composite material; COBYLA algorithms; wind turbine blades; STRUCTURAL OPTIMIZATION; TOPOLOGY;
D O I：
10.3390/jmse11010075
中图分类号：
U6 [水路运输]; P75 [海洋工程];
学科分类号：
0814 ; 081505 ; 0824 ; 082401 ;
摘要：
In this paper, a constrained optimization by linear approximation (COBYLA) algorithm is used to optimize the design of a 5 MW wind turbine blade. In the process of blade material modeling, the actual manufacturing conditions are considered, and the load of blades under 50 m/s wind conditions is analyzed based on the blade element momentum (BEM) method. Mass optimization was achieved by removing material from the shear webs. In addition, constraints such as tip displacement, stress, and frequency during blade design were considered. The results show that the mass is reduced by about 1.7% after removing material from blade webs, while the structural response of the blade remains unchanged. This case provides a practical reference for commercial wind turbine blades.
引用
收藏
页数：12
相关论文
共 50 条
  • [1] Design and Optimization of Composite Offshore Wind Turbine Blades
    Tarfaoui, M.
    Shah, O. R.
    Nachtane, M.
    JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 2019, 141 (05):
  • [2] Investigation and Validation of Numerical Models for Composite Wind Turbine Blades
    Finnegan, William
    Jiang, Yadong
    Dumergue, Nicolas
    Davies, Peter
    Goggins, Jamie
    JOURNAL OF MARINE SCIENCE AND ENGINEERING, 2021, 9 (05)
  • [3] Numerical models for robust shape optimization of wind turbine blades
    Vucina, Damir
    Marinic-Kragic, Ivo
    Milas, Zoran
    RENEWABLE ENERGY, 2016, 87 : 849 - 862
  • [4] Design of GRP composite wind turbine blades
    Chen, Yuncheng
    Chen, Yuyue
    Wu, Peichao
    Wind Engineering, 1988, 12 (02) : 125 - 133
  • [5] Aerostructural Design Optimization of Wind Turbine Blades
    Batay, Sagidolla
    Baidullayeva, Aigerim
    Zhao, Yong
    Wei, Dongming
    Baigarina, Akerke
    Sarsenov, Erkhan
    Shabdan, Yerkin
    PROCESSES, 2024, 12 (01)
  • [6] OPTIMIZATION DESIGN OF COMPOSITE WIND TURBINE BLADES INTEGRATING LIGHTNING STRIKE ANALYSIS
    Hu, Weifei
    Wang, Yeqing
    PROCEEDINGS OF THE ASME 11TH INTERNATIONAL CONFERENCE ON ENERGY SUSTAINABILITY, 2017, 2017,
  • [7] Topology Optimization-Driven Design for Offshore Composite Wind Turbine Blades
    Song, Jian
    Chen, Junying
    Wu, Yufei
    Li, Lixiao
    JOURNAL OF MARINE SCIENCE AND ENGINEERING, 2022, 10 (10)
  • [8] OPTIMIZATION OF LAMINATING PARAMETERS FOR COMPOSITE WIND TURBINE BLADES
    Zhang Z.
    Qiao Y.
    Wang S.
    Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 2023, 44 (03): : 97 - 103
  • [9] Aerodynamic and structural design of composite wind turbine blades
    Chen, Guanghua
    Tian, De
    Ying, Ding
    MATERIALS, MECHANICAL ENGINEERING AND MANUFACTURE, PTS 1-3, 2013, 268-270 : 1294 - 1298
  • [10] Multidisciplinary optimization design on blades of MW wind turbine
    E, J. (ejiaqiang@126.com), 1600, Central South University of Technology (44):
12345