Solution-processed CZTS thin films and its simulation study for solar cell applications with ZnTe as the buffer layer

Using zinc tellurium (ZnTe) as the buffer layer in the Cu2ZnSnS4 (CZTS)-based solar cells showed an improvement in overall efficiency. ZnTe is investigated as an alternative to replace the conventional toxic Cd-contained buffer layers. It may also reduce the overall cost of these cells as both layers (ZnTe and CZTS) have eco-friendly and earth-abundant constituents. The sol-gel spin coating method is used for the deposition of CZTS thin films on the corning glass substrates. The X-ray diffraction studies showed the peaks corresponding to (112), (200), (220), and (312) planes which confirmed the formation of the essential kesterite phase. The optical band gap of the deposited films was found at around 1.45 eV by the UV-visible-NIR spectrophotometer. The optimum thickness of the absorber layer (CZTS) and buffer layer (ZnTe) was investigated based on the performance of the ZnO:Al/ZnO/ZnTe/CZTS/Mo cell structure by using the AMPS-1D simulation tool. In contrast, the tool was molded by the experimentally investigated data for the constituent materials of the cell structure. The solar cells' efficiency was increased by 23.47% at 2500 nm and 50 nm thickness of the CZTS and ZnTe layers, respectively. In addition, it was analyzed and found that the current density value showed an improvement with operating temperature as it is one of the requirements in the high solar radiation areas where the temperature even rises more than 50 degrees C in the summer.